77
Using the Printer
$Paper Source
Selects media by choosing the location (trays) or the type of media.
BAuto [Plain Paper]:
Prints on paper loaded in a paper tray. The printer picks paper from the
paper tray that is loaded with the media size you selected in the
application software. When the tray is empty, the printer automatically
picks from another paper tray of the same media size in the order of
Upper, Middle and Lower.
BAuto [Transparency]:
Prints on transparency loaded in a transparency tray. The printer picks
transparency from the transparency tray that is loaded with the media
size you selected in the application software. When the tray is empty,
the printer automatically picks from another transparency tray of the
same media size in the order of Upper, Middle and Lower.
BUpper :
Prints on media loaded in the standard tray.
BMiddleS1:
Prints on media loaded in the upper tray (optional feeder).
BLowerS1:
Prints on media loaded in the lower tray (optional feeder).
BMPT Plain Paper, MPT Transparency, MPT Label, MPT Coated
Paper, MPT Envelope, MPT Paper 2nd Side :
Prints on paper, transparency or label, etc. loaded in the Multi-purpose
tray. The printer will print on the selected media with optimal quality.
S1If the optional feeder has not been installed, the printer selects the
standard tray automatically.
%Copy Count
Determines how many copies of the document will be printed.
Note:
B

The number of copies can also be determined using the application

software. However, it is recommended to set the number of copies using

one method, either from this driver or from the application software to

avoid printing problems.

&Orientation
Selects Portrait (vertical) or Landscape (horizontal).
Portrait Landscape
AA