62
Printer Panel
Press the MENU/EXIT button to enter the Menu mode.
Press the F/Ibutton until the desired menu is displayed.
Press the ENTER button to enter the item menu.
Press the F/Ibutton until the desired item is displayed.
Press the ENTER button to enter the Selection 1 menu.
BIf you have selected Configuration Page or Calibration Test Print in step 4,
the printer will exit the Menu mode after printing the page.
Press the F/Ibutton to increase/decrease the numerical value
or display the desired selection.
Press the ENTER button to activate your selection and advance
to the next item for the same menu that you selected in step 2.
BIf you have selected Data Timeout in step 4, you will enter the Selection 2
menu. Press the F/Ibutton to increase/decrease the data time out, then
press the Enter button to activate your selection and exit the Menu mode.
If you wish to set more items in the same menu, repeat steps 4 to
7 above.
BTo exit the Menu mode at any stage, press the MENU/EXIT button.
BTo change the setting of an item of a different menu, first exit the Menu
mode, then repeat steps 1 to 8 above.
Using the Printer
Outline for Operation
1
2
3
4
5
6
7
8
MENU
/EXIT
CONTINUE
CANCEL
ENTER
READY
ERORR
FI
MENU/EXIT ENTER