3.2 - Installing the KeyMaster.

When the mechanism is removed it is possible to install the Key- Master. fig. 4.

Fig. 4

Seven wires have to be soldered onto the MPEG board (which are attached to the mechanism). All seven wires have to be soldered onto the bottomside of the MPEG board. Remember to adjust the ends of the wires so they will fit onto the soldering pads.

Solder the seven wires onto the board as shown on fig. 4-5-6.

Do not change or remove any components.

Page 6
Image 6
Panasonic 98RV1 installation manual Installing the KeyMaster, Do not change or remove any components