Panasonic AG-2570 operating instructions To Set the Category, Category Indication Icon

To Set the Category

The category setting allows you to find what kind of programs are recorded by the character and the icon indications.

Press 1 while the Jet	CATEGORY SETTING
	≥MOVIE	≥SPORT
Navigator list appears.
	≥MUSIC	≥CHILD
	≥DRAMA	≥NEWS
	≥EDUCA	≥OTHER

≥DOCUM		≥– – – – –
SELECT:		END : MENU
	3421

Category	Indication	Icon
MOVIE	MOVIE
MUSIC	MUSIC
DRAMA	DRAMA
EDUCATION	EDUCA
DOCUMENTARY	DOCUM
SPORTS	SPORT
CHILDREN	CHILD
NEWS	NEWS
OTHERS	OTHER

To Delete the Jet Navigator Data of a Single Video Cassette Tape:

Keep [CANCEL] pressed for more than

5 seconds while the Jet Navigator list appears. “– –” appears on the list.

–See page 20 on the way to delete all the Jet Navigator data stored in the VCR’s memory.

Notes:

–The Jet Navigator list is stored in each cassette.

–Signals approximately 10 seconds before and after the current tape position are checked. (During this checking, [CHECKING JET NAVIGATOR DATA] is displayed on the TV screen.)

–Checking cannot be performed properly when signals are attempted to be checked at portions of the tape where there are no signals such as at unrecorded portions of the tape. In this case, press [NAVI] at a portion of the tape where a program has been recorded of this VCR. This will allow signal checking to be performed more reliably. When a signal can still not be found, [CAN NOT FIND JET NAVIGATOR DATA] is displayed on the TV and you cannot find the beginning of the program.

–Up to 20 cassettes and 50 programs can be registered.

–If 50 recorded programs data is already stored in memory and you attempt to store timer recording data for another program, the message [REMAINING PROGRAM “0” DELETE JET NAVIGATOR DATA] appears. If you attempt to make a new recording, this same message also appears after you insert the cassette and the Jet Navigator data is checked. As each timer recording or manual recording is finished, the program data is deleted, starting from the oldest data.

–When a new program is attempted to be recorded if programs equivalent to

20 cassettes are already stored in memory,

[REMAINING CASSETTE “0” FOR JET NAVIGATOR DELETE JET NAVIGATOR DATA] is displayed. Programs recorded without deleting data as instructed are not registered in the list.

32