22
VQT4M90
Connecting to the AC outlet
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical out let.
Important:
≥Use the supplied AC adaptor. Do not use the AC adapt or of another device.
≥Do not use the AC cable with any other equipment as it is designed on ly for this unit. Also,
do not use the AC cable from other equipment with this unit.
(AG-AC90P/PJ)
AAC cable (K2CB2CB00022; supplied)
(AG-AC90PX)
BAC cable (K2CA2YY00129; supplied)
≥Insert the plugs as far as they will go.
1Connect the AC cable to the AC adaptor and the AC outlet.
(AG-AC90P/PJ only)
≥Use the AC cable (K2CB2CB00022; supplied) dedica ted for the AC adaptor.
2Connect the AC adaptor to the DC input terminal [DCIN].
∫Removing the AC adaptor
≥Make sure to set the power switch to OFF and the status indicat or is turned off when
disconnecting the AC adaptor.
AG-AC90-VQT4M90_mst.book 22 ページ ２０１２年９月２５日 火曜日 午後１時１８分