The remote control

Insert the battery

Remote control usable range

1 Push the catch in the direction shown by arrow to remove the holder.

2 Insert the battery with the “+” marked side facing up.

The distance between the remote control and the unit’s remote control sensor: Within approx. 5 m Angle: Approximately 10° upward,

approximately 15° downward, approximately 15° leftward, or approximately 15° rightward (when the accessory battery is used)

Remote control sensor (Rear)

Preparation

3 Return the holder to its original position.

When the battery (CR2025) has run out, replace it with a new one. (The battery lasts about one year, depending on the frequency of use.)

If the remote control unit fails to work even when it is operated near the camera-recorder’s remote control sensor, the battery has run out.

Keep the battery out of the reach of children.

Remote control sensor (Front)

The remote control is intended for indoor operation. Outdoors or under strong light, the unit may not operate properly even within the usable ranges.

The remote control is set to OFF in the factory settings. When using the remote control, set the REMOTE CONTROL item in the OTHER FUNCTIONS screen to ON. (Page 62 of Vol.2)

Turn on/off the camera

Set the POWER switch to ON.

Turn on the camera:

The mode lamp (CAM) lights red (CAMERA mode) and the camera is now in the recording pause mode.

Turn off the camera:

The mode lamp (CAM/PB) goes out.

Energy-saving mode

According to the settings made in the POWER SAVE item of the OTHER FUNCTIONS screen

in the settings menu, the following will apply if no designated operationsare performed for approximately five minutes while recording is paused (when an SD Memory Card has been inserted).

ON: The camera recorder turns off automatically.

OFF: Does not switch OFF the camera.

See the setup menus, POWER SAVE (Page 63 of Vol.2) for details.

 

 

 

 

 

 

MENU

EXEC

 

 

 

 

 

START/

PUSH-ENTER

 

 

 

 

 

STOP 2

 

 

 

 

 

 

+

 

 

 

 

 

 

AUDIO MON

 

ON

 

 

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

FOCUS

A FUNCTION

 

DISP/

POWER

 

PUSHAUTO

 

USER 1

MODECHK

OFF..ON CAM

MODE

 

 

M

 

 

 

PB

 

 

 

 

 

 

 

IRIS GAIN

WHITEBAL

USER 2

CH1

AUDIOLEVEL

CH2

 

 

ML

AB

 

 

 

 

 

 

H

PRST

 

 

 

 

POWER switch

POWER..

OFF ON CAM MODE

PB

Mode lamp

27