15
BEFORE USE
Hold down the white button and turn the
POWER lever to the OFF position.
The power is now turned off, and the CAMERA
lamp goes off.
2Disconnect the DC cord from the DC input
socket.
O
F
F
O
N
M
O
D
E
POWER
CAMERA
VCR
Turning off the power
Disconnecting the power cord
3Disconnect the DC cord and AC cord from
the AC adapter.
1Disconnect the AC cord from the power
outlet.
3
3
1
2
Checking the system operations (cont.)
Removing the tape
1Slide the OPEN/EJECT lever in the direction
of the arrow, and open the cassette cover.
When the cover is fully opened, the cassette
holder pops out automatically.
2Take out the cassette tape.
3Press the part marked “PUSH” and close the
cassette holder.
4Close the cassette cover after the cassette
holder has been completely retracted.
2
OPEN/EJECT
1
3
4
OCheck that the camera-recorder’s power is
on before sliding the OPEN/EJECT lever.
OClose the cassette cover if you are not
going to insert a cassette tape immediately
after removing another.
ODo not attempt to remove a tape while you
are recording. The cassette cover opens
but recording will continue, allowing outside
light and dust to adversely affect the tape.