When adding sound to an existing recording
by audio dubbing, you can use this function to
set the point at which the audio dubbing is to
end. (P59)
54
1Press the COUNTER button to display the
counter memory.
2At the desired position on the tape, press the
RESET button (counter) to reset the counter
memory display.
3Proceed with playback or shooting.
5When the tape is rewound or fast forwarded,
it stops automatically near where the counter
memory display was reset.
Counter
You can display a counter that indicates how
much time has elapsed during shooting or
playback by pressing the COUNTER button.
The following data is selected in turn each time
the COUNTER button is pressed.
0 : 00. 0 : Counter value
7
M 0 : 00. 0 : Counter memory
7
TC XX : XX : XX. XX : Time code
7
UB XX XX XX XX : User’s bit
7
Returns to original screen
OWhat is shown on the counter can be reset to
zero by pressing the RESET button (counter)
while the counter value or counter memory is
displayed.
OThe time code and user’s bit cannot be reset
using the RESET button (counter).