53
PLAYBACK
Search functions (cont.)
OTo stop the search at any time, press the
STOP button ($).
This function searches for the index signals
recorded on the tape so that the tape can be
cued up to a particular part.
Index searches can only be performed using the
remote control unit.
Index search
Index signals
This camera-recorder can record index
signals that serve as a guide for tape cue-up.
OPhoto index:
These signals are recorded when a tape
has been recorded using the photo shot
technique. (P39)
OScene index:
These signals are recorded when index
recording has been performed. (P41, P75)
1Using the menus (P68-P71), select the index
to be searched at the SEARCH item on the
PLAYBACK FUNCTION screen.
PLAYBACK FUNCTIONSPLAYBACK FUNCTIONS
SEARCHSEARCH PHOTO SCENE PHOTO SCENE
32K(12bit) AUDIO
ST1
AUDIO OUT CH1
•
CH2
PUSH MENU TO RETURNPUSH MENU TO RETURN
PB.
ZOOM
MENU
SET
ITEM
SHUTTER/IRIS
VOL/JOG
PUSH
2Press one of the INDEX buttons (9or
:) on the remote control unit.
STILL ADV
PAUSE
STILL ADV
INDEX
SELECT
VAR.
– VOL
+
PB.
STOP INDEX
P
-
IN
-
P
REC A
.
DUB
PLAY
C/REW FF/
B
PHOTO:
When the INDEX button is pressed, the
tape is cued back or forward to the image
containing the photo index signal.
When the tape is cued, it is played back for
about 4 seconds, and then the image is
played back as a still picture. (If you
continue still-picture playback for 5 or more
minutes, the camera-recorder is set to the
stop mode in order to safeguard the heads
from wear.)
SCENE:
When the INDEX button is pressed once,
“S1” is displayed, and the tape is cued back
or forward to the image containing the photo
index signal.
Each time this button is pressed again after
operation has started, “S2” and then “S3”
are displayed, and the tape is cued up to
the second and subsequent scenes. When
the tape is cued up, playback starts from
that section. (Up to the ninth scene before
or ahead on the tape can be specified for
cue-up.)
The function may not work properly if the
interval between one index and the next is
less than one minute.