Nonlinear editing (PC mode)

Non-linear editing of video data on SD Memory

4 Perform non-linear editing on the computer.

Cards can be performed by connecting the camera

via the USB connection cable to a computer for

The contents of the SD Memory Card will

appear as a removable disk icon within My

editing. (As for connection, refer to page 72)

Computer or the desktop on the computer

Use a sufficiently charged battery or the AC

screen. (Page 109)

adapter.

(Example) Windows

 

 

 

The following conditions are necessary for USB

 

 

 

connection.

Removable disk (E:)

• PC with Windows 2000, Windows XP, or

Windows Vista; Macintosh with Intel CPU (Intel

(Example) Macintosh

Mac)

• USB 2.0 (High Speed, Mass Storage Class)

 

 

 

compatibility (not compatible with USB 1.1)

 

 

 

• Only connect to one computer at a time.

 

 

 

 

 

 

• Camera cannot be operated if a hub or other

NO NAME

device is connected between the camera and

 

 

 

computer.

• When copying files from the camera to a

• Do not use a USB connection cable of more than

computer, be careful to ensure that files are

3 m in length. Using too long a cable may cause

not accidentally overwritten.

erroneous operation.

• For more details, please refer to your

 

 

 

computer editing software’s operating

1 Insert the SD Memory Card, and move the

instructions.

• When changing cards, always ensure that

POWER switch to ON.

the access lamp is not flashing and that the

2 Press the mode button to illuminate the PB

card is not currently being accessed.

• Operations cannot be performed on the

lamp, and hold the button down again (for at

camera while in PC mode.

least 2 seconds).

• Always perform “safe hardware removal”

The PC lamp will flash, and the camera will

when disconnecting the cable.

change to PC mode.

• The data on the SD Memory Card cannot be

 

 

 

3 Connect the camera to the computer with

accessed when the SD Memory Card slot

cover is open.

5 Turn the camera’s power off.
the USB connection cable.

Turn the computer’s power on before

connecting.

 

 

 

 

 

 

• If the camera cannot be correctly recognized

 

 

 

 

 

 

 

 

 

by the computer, this may be able to be

 

 

 

remedied by one of the following methods.

 

 

 

· Turn the power of the camera and the

 

 

 

computer off and back on again.

 

 

 

· Remove the SD Memory Card from the

 

 

 

camera and reinsert it.

 

 

 

· Connect to a different USB terminal on the

 

 

 

• When the USB connection cable is not

computer.

• Hold down the mode button after

connected, CHECK USB CABLE is

disconnecting the USB connection cable to

displayed.

switch back to PB mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Editing

75