Setup menu list (continued)SW MODE screen

Item

Display

 

 

Description of settings

mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MID GAIN

(Camera)

Sets the gain value assigned to the M position of the GAIN switch.

 

 

0dB, 3dB, 6dB, 9dB, 12dB
HIGH GAIN

(Camera)

Sets the gain value assigned to the H position of the GAIN switch.

 

 

0dB, 3dB, 6dB, 9dB, 12dB

ATW

(Camera)

Sets the operation of the ATW (Auto Tracking White) function assigned to the

 

 

WHITE BAL switch. When the ATW function is allocated to the AUTO/MANUAL

 

 

switch or USER button, the operation remains effective.

 

 

Ach: Activates the ATW function when the WHITE BAL switch is set to A.

 

 

Bch:

Activates the ATW function when the WHITE BAL switch is set to B.

 

 

PRST:

Activates the ATW function when the WHITE BAL switch is set to PRST.

 

 

OFF:

Deactivates the ATW function.

HANDLE

(Camera)

Sets the zoom speed assigned to each setting position of the HANDLE ZOOM

ZOOM

 

switch.

 

 

 

 

 

 

L/OFF/H: Sets LOW (low speed)/OFF/HIGH (high speed) to the 1/2/3 position.

 

 

 

(Zoom is disabled when set to OFF.)

 

 

L/M/H: Sets LOW (low speed)/MID (medium speed)/HIGH (high speed) to the

 

 

 

1/2/3 position.

 

 

L/OFF/M: Sets LOW (low speed)/OFF/MID (medium speed) to the 1/2/3 position.

 

 

 

(Zoom is disabled when set to OFF.)

IRIS DIAL

(Camera)

Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL

 

 

IRIS mode)

 

 

 

 

 

DOWN OPEN:The iris opens when the IRIS dial is turned downward.

 

 

UP OPEN:

The iris opens when the IRIS dial is turned upward.

USER1

(Camera)

Selects the function assigned to the USER1 button.

 

(PB)

SPOTLIGHT: Switches auto iris control for the spotlight on or off.

 

 

BACKLIGHT: Auto iris control for the backlight compensation. (Page 43)

 

 

BLACKFADE: Blackfade (Page 43)

 

 

WHITEFADE: Whitefade (Page 43)

 

 

ATW:

 

Switches the ATW function on or off.

 

 

ATW LOCK: Fixes the white balance value when the button is pressed during

 

 

GAIN:18dB:

ATW. Press again to perform ATW.

 

 

 

 

 

 

 

Press the button to set the gain value to 18 dB. This setting takes effect with the

 

 

60i and 60P recording formats only. It is not valid when the slow shutter mode

 

 

(1/15) is established.

 

 

• When the gain value is switched to 18 dB or switched from 18 dB to another

 

 

value, the image can be disordered for a moment.

 

 

• If the unit is being used in the MANUAL mode or AUTO mode, set the AGC item

 

 

on the AUTO SW screen of the setting menu to OFF to use this function.

 

 

D.ZOOM:

Changes the ratio of the DIGITAL ZOOM function.

 

 

 

 

Each press of the button changes the ratio in the following order:

 

 

 

 

OFF (x1) → x2 → x5 → x10 → OFF (x1). (Page 34)

 

 

INDEX:

 

Index recording (Page 45)

 

 

SHOT MARK: Shot mark recording (Page 45)

 

 

LAST CLIP: Deletes the last recorded clip. (Page 45)

 

 

• After recording, clips cannot be deleted by switching to PB or PC mode, by

 

 

changing the recording format, or by turning the camera off.

USER2

(Camera)

Assigns a function to the USER2 button.

 

(PB)

The setting contents are the same as USER1.

 

 

BACKLIGHT

 

 

 

 

 

 

 

 

 

indicates the factory setting.

88