Manuals / Brands / Photography / Camcorder / Panasonic / Photography / Camcorder

Panasonic AG-HMC151E Adjusting the shutter speed, mode, mode, Shutter speed, Shutter speed, SHUTTER button, SPEED SELECT buttons, 1 Press the SHUTTER button

1 113

Download 113 pages, 3.12 Mb

Adjusting the shutter speed

SHUTTER button

	SPEED SELECT buttons
BARS	SHUTTER	SPEED SELECT
CH1 SELECT	CH2 SELECT	INPUT 1	SHUTTER 1/50
CH1 SELECT	CH2 SELECT	INPUT 1	INPUT 2
INT(L)	INT(R)	ON	ON
INPUT1	INPUT2	OFF	OFF
INPUT2		MIC POWER +48V
	AUDIO	MIC POWER +48V
	AUDIO
COUNTER	RESET/TC SET	ZEBRA	OIS
LCD		EVF DTL	WFM

1 Press the SHUTTER button.

Each time you press the SHUTTER button, the shutter speed switches between normal (OFF) and the speed you selected with the SPEED SELECT buttons.

2 After you have pressed the SHUTTER button, press SPEED SELECT buttons to select the shutter speed.

The shutter speed changes as follows each time you press SPEED SELECT + button (The order is reversed for the SHUTTER SELECT

-button.)

•Remember that the faster the shutter speed, the lower the sensitivity.

•If iris is set to auto, then it will open wider with higher shutter speeds and thereby reduce focal depth.

•It will take longer to focus when the shutter speed has been reduced so it is recommended that the unit be secured to a tripod, etc. for use.

•The current shutter speed appears on the viewfinder and LCD monitor unless you have selected OFF in OTHER DISPLAY in the DISPLAY SETUP screen of the setup menus. It is not displayed if you have set the shutter speed to normal (OFF).

•With artificial lighting and especially fluorescent lights and mercury-vapor lamps, the luminance changes in synchronization with the power line frequency. When this frequency is 50 Hz, mutual interference will occur between the camera- recorder’s vertical sync frequency (approx.

60 Hz) and the lighting frequency (50 Hz). This means that the white balance may change periodically.

Before shooting in areas with artificial lighting or adjusting the white balance, set the shutter speed as follows.

When SYSTEM FREQ is set to 50 Hz

Progressive	Shutter speed
mode	50 Hz	60 Hz

OFF (50i)	OFF (1/50)	1/60
25P	OFF (1/50)	1/60
When SYSTEM FREQ is set to 59.9 Hz
Progressive	Shutter speed
mode	50 Hz	60 Hz

OFF (60i)	1/100	OFF (1/60)
30P	OFF (1/50)	1/60
24P	OFF (1/50)	1/60

•The gain is fixed at 0 dB with a shutter speed of 1/12∗.

∗ 1/15 when SYSTEM FREQ is set to 59.9 Hz

46

Contents

Model No. AG-HMC151E Read this first WARNING: CAUTION: Operating precaution IMPORTANT To remove the battery Main Power Battery (Refer to page 20 for the detail.) Battery release button Remote Control Battery Contents Panasonic Battery (Rechargeable Battery) Before use Description of parts Playback Editing Menu Reference How to handle data recorded on Outline of operations Please read before use Please read before use (continued) SDHC-compatibledevice SD-compatibledevice Can be used Cannot be used Precaution for use About this manual What is AVCHD Information regarding compatibility of SDHC Memory Cards and recorded video SDHC Memory Cards Compatibility of recorded video Older, non-AVCHD-compatibleDVD recorder or DVD player, etc Accessories Optional accessories Description of parts 1Focus ring (Page 36) 2Zoom ring (Page 34) 3FOCUS ASSIST button (Page 37) 4USER buttons (Pages 43 and 88) 5ZOOM switch (Page 34) Terminals and mounting parts Description of parts 1Security lock hole 2Light shoe 3Microphone shoe (Page 71) Recharging the battery ■Charging time and available recording time (Approx.) Battery Voltage Charging Maximum Power sources Adjusting the hand strap Attaching the shoulder strap Detaching and attaching the lens hood The remote control Turn on/off the camera Standby mode Tally lamp Viewfinder Using the LCD 1 Set the POWER switch to ON. (Page 22) 2 Hold down the OPEN button and open the LCD monitor OPEN button 3 Position the LCD monitor where it is easiest to see Viewfinder (continued) Adjusting the screen display Changing backlight brightness 1 Select LCD BL in the LCD item on the settings menu SW MODE screen 2 Press the LCD button Reversing image display 1 Select LCD REV in the LCD item on the settings menu SW MODE screen Setting the calendar Page Basic shooting operations Checking photos taken (REC CHECK) SD Memory Card access lamp CAM mode (PB mode) Illuminated orange: Flashing orange (fast): Basic shooting operations (continued) Formatting SD Memory Cards 3 Select CARD FUNCTIONS→CARD FORMAT from the menu Select YES on the conformation screen Press the MENU button to finish Removing SD Memory Card Repairing SD Memory Cards Protecting SD Memory Cards switch Using the zoom function Shooting in progressive mode Shooting in manual mode Using focus assist FOCUS ASSIST button EXPANDED: GRAPH: Focus not aligned Shooting in manual mode (continued) Adjusting the gain GAIN switch 1 Use the AUTO/MANUAL switch to set to manual mode. (Page 36) 2 Switch the gain with the GAIN switch. L: White balance adjustments 2 Set the shutter speed. (Page 46) 5 Press the AWB button Message during adjustment AWB Ach ACTIVE Black balance adjustments ABB ACTIVE ABB END Auto Tracking White (ATW) White balance sensor Shooting techniques for different targets Shooting techniques for different targets (continued) Marker Image level detection area Marker Image level Optical Image Stabilizer Adding effects to images BLACKFADE: WHITEFADE: Using the USER buttons Wave form monitor function Adjusting the volume while shooting Adjustingthe volume Shot mark function Index recording Time stamp function LAST CLIP function Adjusting the shutter speed When SYSTEM FREQ is set to 50 Hz With the 1080/50i or 720/50P formats With the 1080/25P or 720/25P formats With the 1080/60i or 720/60P formats With the 1080/30P or 720/30P formats Switching Audio Input Adjusting the recording level Using scene files After you finish setting the filename, push the Operation lever Select YES on the confirmation screen Saving scene files and other settings on SD Memory Cards Clip metadata Clip metadata (continued) Uploading the metadata (META DATA) Loading the metadata Selecting whether to record the metadata on the SD Memory Card 1 Press the mode button and select CAM mode Using the Counter Charging the built-inbattery/Setting the time code 4 When the screen below appears, set the time code value Push the Operation lever when you have finished setting the time code Charging the built-inbattery/Setting the time code (continued) Setting user information 2 In the setup menus, TC/UB SETUP screen, select UB PRESET 4 Set the user information Push the Operation lever when you have finished setting the user information Basic playback operations Thumbnail screen M: Shot mark Thumbnail screen (continued) Adding shot marks to clips Direct shooting functions Playback settings (PLAY SETUP) Playback settings (PLAY SETUP) (continued) Resume playback (RESUME PLAY) 2 Set the RESUME PLAY item in the PLAY SETUP screen to ON 4 Select a clip for playback Set skip method (SKIP MODE) Thumbnail operations Thumbnail operations (continued) Deleting and protecting clips (OPERATION) DELETE: ALL CLIPS: INDEX: CLIP PROTECT: Format card and check clip and card information (CARD FUNCTIONS) 3 Tilt the Operation lever in the to select item, and push the Operation lever CARD FORMAT: 1REMAIN: 2SD STANDARD: 3PROTECT: 4SPEED CLASS: 1Clip number Useful playback functions Useful playback functions (continued) Frame-by-frameplayback Viewing images on a television 1 Connect the camera-recorderto the TV set. (Page 73) 2 Start playback Connecting external units Connecting external units (continued) Computer (non-linearediting/file transfer) Computer (optional) Mini-B TV/Monitor Component video cable (included) (included) Editing Page Nonlinear editing (PC mode) Screen displays 8Information display 9EXPANDED display Microphone level automatic control display 11Marker luminance display 12Timestamp display (Page 45) Screen displays (continued) 25Marker display Optical Image Stabilizer 27Scene filename display (Page 50) 28Remaining battery capacity display Main warning displays CANNOT BE USED DUE TO INCOMPATIBLE DATA CANNOT DELETE. Clip cannot be deleted CANNOT PLAY CANNOT RECORD PH MODE AND HA MODE INTO THIS CARD Error displays THE CLIP IS PROTECTED PLEASE CANCEL PROTECTION THE RECORDING IS STOPPED (OVER THE LIMITATION) THE TC MODE IS CHANGED TO "NDF Setting the DISPLAY items MODE CHK OTHER DISPLAY settings Displays (Hold down DISP Using the setup menus 7 Repeat steps 2 - 5 to change any other settings Initializing the menu settings To initialize the scene file Menu Setup menu structure Playback mode menu Setup menu list SCENE FILE screen (continued) DRS OFF, 1, 2 GAMMA HD NORM: Setup menu list (continued) SW MODE screen MID GAIN 0dB, 3dB, 6dB, 9dB, 12dB HIGH GAIN SW MODE screen (continued) USER2 BACKLIGHT USER3 INDEX AUTO SW screen A.IRIS ON: AGC 6dB: RECORDING SETUP screen REC FORMAT PH 1080/50i PH 1080/25P PH 720/50P TC/UB SETUP screen TC MODE DF: NDF: TCG AV OUT SETUP screen HDMI OUT SEL FIX: 576P 480P DISPLAY SETUP screen DETECT1 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105% DETECT2 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF DISPLAY SETUP screen (continued) SELF SHOOT NORMAL, MIRROR EVF COLOR CARD FUNCTIONS screen CARD FORMAT YES: CARD STATUS META DATA screen (continued) META INITIAL SET PLAY SETUP screen PB FORMAT OPERATION screen DELETE ALL CLIPS: SELECT: CLIP PROTECT OTHER FUNCTIONS screen (continued) TIME ZONE +00:00 POWER SAVE SYSTEM FREQ Before calling for service Recording Cannot record even through the SD Memory Card is inserted correctly Recording stops by itself Before calling for service (continued) PC connection Computer does not recognize camera when USB connection cable is Page Operating precautions Liquid crystal displays Do not point the lens or viewfinder at the sun Updating the driver in the camera Cleaning Storage Precautions Recording format How to handle data recorded on SD Memory Card Specifications [Recording/playback] Recording Format Compression method Recording media Transmission rate [Video System] Video signals Specifications (continued) [Other inputs/outputs] USB CAM REMOTE TC PRESET IN/OUT (Also used for VIDEO OUT) IN: 1.0 V to 4.0 V [p-p]10 kΩ For business users in the European Union Information on Disposal in other Countries outside the European Union Note for the battery symbol (bottom two symbol examples): Professional & Broadcast IT Systems Business Unit Europe Panasonic AVC Systems Europe a Division of Panasonic Marketing Europe GmbH