Panasonic AG-HMC151E Camera, Setting user information, 4 Set the user information, 1 Set the POWER switch to ON, 2 In the setup menus, TC/UB SETUP screen, select UB PRESET

Charging the built-in battery/Setting the time code (continued)

Setting user information

Setting user information allows you to store 8-digit information in the hexadecimal format.

User information is automatically saved in the memory and retained after you turn off the power.

1 Set the POWER switch to ON.

2 In the setup menus, TC/UB SETUP screen, select UB PRESET.

•For menu operation (Page 82)

•Operations may also be performed using buttons on the remote control that correspond to those on the camera. For details, see “Description of parts (Remote control)”. (Page 18)

4 Set the user information.

Tilt the Operation lever in the directions and select user information characters.

•You can use numbers from 0 to 9 and letters from A to F.

Tilt in the direction to move to the next digit,

and tilt in the directions again to select character.

3 Tilt the Operation lever in the direction to move to YES, and push the Operation lever.

You can reset the user information to nothing by pressing RESET/TC SET button.

BARS	SHUTTER	SPEED SELECT
CH1 SELECT	CH2 SELECT	INPUT 1	INPUT 2
INT(L)	INT(R)	ON	ON
INPUT1	INPUT2	OFF	OFF
INPUT2		MIC POWER +48V
	AUDIO
COUNTER	RESET/TC SET	ZEBRA	OIS
LCD		EVF DTL	WFM

Camera

5

6

Push the Operation lever when you have finished setting the user information.

Tilt the Operation lever in thedirection to move to YES, and push the Operation lever.

58