Panasonic AG-HMC151E Setup menu list, NO:, NO:, Ach, Bch, Item, mode, INIT, SCAN, WRITE, READ:, LOAD:, SAVE:, LEVEL, LEVEL, PHASE, WRITE:, SYNCRO, • 25P:, • 30P:, • 24P:, DETAIL

Setup menu list

When the settings are changed using the SYSTEM FREQ item (Page 99) on the OTHER FUNCTIONS screen, whatever has been set for SYNCRO SCAN (See below), REC FORMAT (Page 91), HDMI OUT SEL, and CMPNT OUT SEL (Page 93) will be changed to the initial setting.

SCENE FILE screen

Item	Display		Description of settings
	mode
CARD READ/	(Camera)	Reads and writes scene files on the SD Memory Card.
WRITE		READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card
			after setting values are selected.
		WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the
			SD Memory Card.
		NO:	Returns to the last screen.
LOAD/SAVE/	(Camera)	LOAD:	Loads the scene file settings which is saved by this camera.
INIT		SAVE: Saves the changed scene file settings.
		INITIALIZE: The settings of the scene file selected with the SCENE FILE dial
			are returned to the factory settings.
		NO:	Returns to the last screen.
SYNCRO	(Camera)	Adjusts the synchro scan shutter speed used for shooting images on a TV
SCAN		screen, etc.		or will cause the values to change at
		Holding the Operation lever toward the
		a faster rate.
		When SYSTEM FREQ is set to 50 Hz		When SYSTEM FREQ is set to 59.9 Hz
		• 50P/50i:		• 60P/60i:
		1/50.0 … 1/248.9		1/60.0…1/249.8
		(Factory default setting is 1/48.0.)		(Factory default setting is 1/48.0.)
		• 25P:		• 30P:
		1/25.0 … 1/48.0 … 1/248.9		1/30.0…1/48.0…1/249.8
				• 24P:
				1/24.0…1/48.0…1/249.8
DETAIL LEVEL	(Camera)	Adjusts the level of the image outline correction (in the horizontal and vertical
		directions).
		- 7…0…+ 7
V DETAIL	(Camera)	Adjusts the level of outline correction in the vertical direction.
LEVEL		- 7…0…+ 7
DETAIL	(Camera)	Adjusts the level of noise reduction of the detail signal.
CORING		- 7…0…+ 7
		Set to – for a clearer image. Noise increases slightly.
		Set to + to reduce noise.
CHROMA	(Camera)	Adjusts the chroma level.
LEVEL		- 7…0…+ 7
CHROMA	(Camera)	Makes fine adjustments to the chroma phase.
PHASE		- 7…0…+ 7
COLOR TEMP	(Camera)	Makes fine adjustments to the color temperature (after white balance Ach
Ach		adjustment).
		- 7…0…+ 7
COLOR TEMP	(Camera)	Makes fine adjustments to the color temperature (after white balance Bch
Bch		adjustment).
		- 7…0…+ 7
MASTER PED	(Camera)	Adjusts the master pedestal (black level of the image) as the basis for images.
		- 100…0…+ 100
A.IRIS LEVEL	(Camera)	Sets the desired AUTO IRIS level.
		- 10…0…+ 10
					indicates the factory setting.

86