Setup

To adjust the viewing conditions of images in the finder

Pull the finder to pull out the visibility adjustment lever A inside, and then move the lever to make the adjustments.

2008.10.102008.10.10

≥You can focus the video in the viewfinder by moving the visibility adjustment lever.

Viewfinder maintenance

If the inside of the viewfinder is stained with dust, then remove the eye cup holder and remove the dust with an air blower, etc.

ªEye cup holder removal method

1Pull the viewfinder to pull out the eye cup holder A. Then, removed the screw B at the center.

2Insert a thin tool such as screwdriver in the hole on the bottom of the eye cup holder. While pushing the internal tab A, remove the eye cup holder.

ªEye cup holder fitting method

1Check that the EVF LCD unit A is pulled out as far as it goes.

≥If you push in the EVF LCD unit, then you may not be able to fit it.

2Insert the eye cup holder straight into its original position until it clicks.

3Screw it in.

43