Checking Bus Power Operation

Check the following before performing any copy operations with the unit when using bus power. Note that the result of this check may not fully guarantee bus power operation on your PC.

Install the AG-MBX10G interface box in the AG-MSU10, check that no important data remains and format the SSD using the FAT format.

Connect the supplied USB cables from the USB connectors on the PC to the USB 2.0 connectors (SIGNAL, POWER) on the unit. To use an eSATA connection, also connect the eSATA cable.

Did the drive appear

on the PC?

No

C

E-13

In Explorer (Windows) or the Finder (Macintosh), select the drive and load the files (copy or create anew).

(Copy about 100 MB worth of files to the SSD.)

 

 

The operation

 

 

 

 

ended in an error

What was the result of

 

C

loading the files?

 

 

Yes

The operation ended normally

Did the WARNING

Yes

B

lamp of the AG-MBX10G interface

box light once or more

 

 

during operation?

 

 

 

No

 

 

 

 

 

A

 

 

AUSB bus power can be used to power the system.

BThere may not be enough power to run the system. Use it installed in the AG-MSU10.

CUSB bus power cannot provide sufficient power. Use it installed in the AG-MSU10.