Control Reference Guide

ENGLISH

65 4

1 2 3

1.AG-MSU10 connectors

Connectors for connecting the interface box to the AG-MSU10 Mobile Storage Unit.

2.USB 2.0 connector (POWER connector) Use the USB cable to connect this connector to a USB 2.0 connector on a personal computer to power the drive from the computer.

personal computer to power the drive from the computer and to transfer data between devices.

4.WARNING LED

Lights to indicate that not enough power is supplied.

For details, refer to “Checking Bus Power Operation” (page E-13).

5.POWER/ACCESS LED

Green: Power is supplied and the device is ready to use.

Orange: The host is accessing the device.

NOTE:

• POWER/ACCESS LED operation depends on the installed SSD.

3. USB 2.0 connector (SIGNAL connector)

6. eSATA connector

Use the USB cable to connect this

Use the eSATA cable to connect this

connector to a USB 2.0 connector on a

 

E-10