Parts and Their Functions

8

9

:

;

<

8PHONES (headphones) jack Stereo mini jack

9PHONES LEVEL (headphones output level adjustment) control

This is used to adjust the level of the audio output from the PHONES jack.

:AUDIO IN CH 3/CH 4 (audio input channel 3/4) connectors (XLR, 3-pin) The audio component or microphones are connected to these connectors.

XLR, 3-pin, female LINE/MIC switching type

LINE : +4 dBu (can be changed to 0 dBu using internal switch)

MIC : –60 dBu (can be changed to

–40 dBu using internal switch)

Phantom power supplies supported.

;AUDIO OUT connector

This is connected to the audio component.

The audio output channel is selected using the MONITOR SELECT switch 3.

XLR, 3-pin, male

+4 dBu (can be changed using internal control)

<DC IN (external power input) socket (XLR, 4P)

Connect the AJ-B75 (optional accessory) AC adapter to this socket when AC power is to be used to operate the camera adapter.

XLR, 4-pin, male

DC 12 V (DC 11 V–17 V)

Operating Cautions

O Set the EMPHASIS item of the audio menu of the camera unit to OFF before use.

O Please consult your local dealer or service center when changing the settings of the switches or VR inside the unit.

6

Page 6
Image 6
Panasonic AJ-CA910P manual Audio OUT connector, DC in external power input socket XLR, 4P, Operating Cautions