Superimposed Screens
When the unit’s MONITOR OUT connectors have been connected to a TV monitor, the control signals, time codes, etc. can be displayed as abbreviations on the TV monitor screen.
This display can be set to ON or OFF by setting setup menu item No.002. (See page 29)
TV monitor
No display
: Normally, no display. P : Flashes when the DC supply voltage has
dropped.
TCR : : :S : Flashes in “FAN STOP” status.
L : Flashes in “LOW RF” status.
N : Flashes in “NO RF” status.
Abbreviations
CTL (control signal)
TCR (playback value of time code)
UBR (playback value of user’s bit)
REMAIN (remaining tape)
Display characters
The background of the superimposed display characters can be changed by setting setup menu item No.006 “CHARA TYPE.” (See page 29)
Display position
The position of the superimposed display characters can be changed by setting setup menu items No.004 “CHARA
TCR 
: 
: 
:
TCR 
: 
: 
: 
TV monitor | TV monitor |
<Notes>
When the PAGE button and DATA+ button or DATA– button are pressed, the counter display appears temporarily on the TV monitor while these buttons are held down to enable the setting to be checked.
Even while the PAGE button is pressed, the settings can be performed using the DATA+ button or DATA– button while the actual status is checked.
TCR | : : : | TCR | : : : |
| TV monitor |
| TV monitor |
21