Setup (Initial Settings)

How to load the user defaults

1 Set the LOCAL/MENU/REMOTE switch to the MENU position.

The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.

2 Press the RESET button.

The unit is set to the default setting mode, and the default setting screen appears on the video monitor.

SELECT MODE

0ESCAPE

1LOAD

2SAVE

3PROTECT

3 Press the MENU-UP button or MENU-DOWN button to move the cursor to the LOAD position, and press the SET button.

The unit is set to the LOAD mode, and the load screen appears on the video monitor.

SET–UP MENU <LOAD> NO FACTORY (ALL)

FACTORY (NOT SYSTEM) USER (ALL)

USER (NOT SYSTEM)

4 Press the MENU-UP button or MENU-DOWN button to move the cursor to USER (ALL), and press the SET button.

O If this operation is performed with the cursor moved to USER (NOT SYSTEM) instead, operation will be performed on the basis of all the user settings saved in the memory except for the SYSTEM menu settings.

O If this operation is performed with the cursor moved to NO, no change is made to the user settings saved in the memory, and operation is returned to the menu screen.

5 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

This completes the menu settings.

How to protect the menus

Opening the setup menu can be prevented even when the LOCAL/MENU/REMOTE switch on the front panel is set to the MENU position by setting the unit to the menu protect mode.

1 Set the LOCAL/MENU/REMOTE switch to the MENU position.

The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.

2 Press the RESET button.

The unit is set to the default setting mode, and the default setting screen appears on the video monitor.

SELECT MODE

0ESCAPE

1LOAD

2SAVE

3PROTECT

3 Press the MENU-UP button or MENU-DOWN button to move the cursor to the PROTECT position, and press the SET button.

The unit is set to the menu protect setting mode, and a screen for checking whether to protect the menus appears on the video monitor.

MENU PROTECT OK?

NO

YES

4 Press the MENU-UP button or MENU-DOWN button to move the cursor to the YES position, and press the SET button.

The menu screen is now displayed.

25