Setup (Initial Settings)

SELECT MODE

0ESCAPE

1LOAD

2SAVE

3PROTECT

3 Press the MENU-UP button or MENU-DOWN button to move the cursor to the LOAD position, and press the SET button.

The unit is set to the LOAD mode, and the load screen appears on the video monitor.

SET–UP MENU <LOAD> NO FACTORY (ALL)

FACTORY (NOT SYSTEM) USER (ALL)

USER (NOT SYSTEM)

4 Press the MENU-UP button or MENU-DOWN button to move the cursor to FACTORY (ALL), and press the SET button.

O If this operation is performed with the cursor moved to FACTORY (NOT SYSTEM) instead, all the factory settings except for the SYSTEM menu settings will be restored.

O If this operation is performed with the cursor moved to NO, the factory settings are not restored, and operation is returned to the menu screen.

5 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

This completes the menu settings.

How to set the user defaults

1 Set the LOCAL/MENU/REMOTE switch to the MENU position.

The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.

2 Perform steps 2 through 6 of “Setting method using on-screen menus,” and change the items to the desired settings.

(See page 23)

3 Press the RESET button.

The unit is set to the default setting mode, and the default setting screen appears on the video monitor.

SELECT MODE

0ESCAPE

1LOAD

2SAVE

3PROTECT

4 Press the MENU-UP button or MENU-DOWN button to move the cursor to the SAVE position, and press the SET button.

The unit is set to the SAVE mode, and the save screen appears on the video monitor.

SET–UP MENU <SAVE>

NO

USER (ALL)

USER (NOT SYSTEM)

5 Press the MENU-UP button or MENU-DOWN button to move the cursor to USER (ALL), and press the SET button.

O If this operation is performed with the cursor moved to USER (NOT SYSTEM) instead, all the settings except for the SYSTEM menu settings will be updated.

O If this operation is performed with the cursor moved to NO, the settings are not updated, and operation is returned to the menu screen.

6 The screen for checking the SAVE operation appears. Press the MENU-UP button or MENU-DOWN button to move the cursor to the YES position, and press the SET button.

The settings are now saved in the memory.

SAVE OK?

NO

YES

7 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

This completes the menu settings.

24