Panasonic AJ- DCP 19

Superimposed Screens

When a TV monitor and the VIDEO OUT2 connector are connected, the abbreviations of the control signal, time code, etc. are displayed on the TV monitor. These displays can be turned ON or OFF using the setup menu item No.005 setting.

TV monitor

TCR 22 : 22 : 22 : 22

Operation mode

The content to be displayed can be selected using the setup menu item No.006 (DISPLAY SEL).

TIME : Counter value

T&STA : Counter value, VTR operation mode

T&S&M: Counter value, VTR operation mode, tape format or error message

TIME mode

Abbreviations

CTL (control signal)

TCR (time code playback value)

UBR (user’s bit playback value)

REM (remaining tape)

Display characters

The background of the characters used for the superimposed displays can be changed using the setup menu item No.009 (CHARA TYPE).

TCR 22 : 22 : 22 : 22	TCR 22 : 22 : 22 : 22
TV monitor	TV monitor

Display position

The position of the superimposed displays can be changed using the setup menu item No.007 (CHARA H-POS) and No.008 (CHARA V-POS) settings.

TCR 22 : 22 : 22 : 22

TV monitor

<Note>

When the PAGE button and DATA+ button or DATA– button are pressed, the counter display appears temporarily while the buttons are held down so that the settings can be checked.

It is also possible to proceed with the settings while checking the actual situation using the DATA+ button and DATA– button while the PAGE button is held down.

TCR 22 : 22 : 22 : 22		Counter value

TV monitor

T&STA mode

TCR 22 : 22 : 22 : 22			Counter value

STOP			VTR operation mode

TV monitor

T&S&M mode

TCR 22 : 22 : 22 : 22			Counter value

			VTR operation mode
STOP

DVCPRO_HD			Tape format or error

TV monitor			message

<Note>

In the VTR operation mode, “BOT” (beginning of tape) or “EOT” (end of tape) appears at the start of the line when the beginning or end of the tape has been detected.

Examples of displays:

EOT STOP

(stopped at the end of the tape)

BOT STANDBY OFF

(on standby at the beginning of the tape)