Panasonic AJ- DCP manual 24

Setup Menus

SYSTEM

	Item		Setting
				Description of setting
No.	Superimposed	No.	Superimposed
	display		display
12	SYS H (HD)	0550	–550	For adjusting the system phase of the HD SDI output (in 27 ns steps).
		:	:	–: The phase is moved ahead.
		1100	0	+: The phase is moved back.
		:	:
		1650	550
14	SYS SC (SD)	0000	–108	For adjusting the system phase of the VIDEO output and SD SDI output.
		:	:	(Total variable range: ±180 degrees or more)
		0108	0	–: The phase is moved ahead.
		:	:	+: The phase is moved back.
		0216	108
15	SYS H (SD)	0000	–429	For adjusting the system phase of the VIDEO output and SD SDI output.
		:	:	(in 74 ns steps)
		0429	0	–: The phase is moved ahead.
		:	:	+: The phase is moved back.
		0858	429	<Note>
				While the value is being adjusted, the sound output will be muted; however
				this is normal and not indicative of a problem. When the adjustment is
				finished, sound will be output.
18	SCH COAR (SD)	0000	0	For adjusting the SCH (subcarrier to horizontal) phase of the VIDEO
		0001	90	output. (4 positions at 90-degree increments)
		0002	180	The SC phase is changed, and the H phase remains unchanged.
		0003	270
19	SCH FINE (SD)	0000	–32	For adjusting the SCH (subcarrier to horizontal) phase of the VIDEO
		:	:	output. (Variable range of ±45 degrees or more)
		0032	0	The SC phase is changed, and the H phase remains unchanged.
		:	:	Use together with No.18 SCH COAR (SD) to cover ±180 degrees.
		0064	32
20	AV PHASE	0000	–100	For adjusting the phase of the AUDIO output with respect to the VIDEO
		:	:	output (in 20.8 µs steps).
		0100	0	–: The audio output phase is moved ahead of the video output.
		:	:	+: The audio output phase is moved back from the video output.
		0200	100

The underlining denotes the factory mode.

<Note>

Items No.12 to No.20 are not initialized even when the initialization operation is conducted.

24