Setup Menus

OPERATION

 

Item

 

Setting

 

 

 

 

 

 

 

Description of setting

No.

Superimposed

No.

Superimposed

 

 

 

display

display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

154

AUTO BACK

 

 

For setting the operation method used for the frame-to-frame continuity

 

 

 

 

function. (This item activates the AUTO BACK function to rewind the tape

 

 

 

 

for several seconds in order to ensure a smooth continuity between the

 

 

 

 

recorded images.)

 

 

0000

OFF

0: No AUTO BACK operation.

 

 

0001

REC-P

1: In the REC PAUSE mode, the AUTO BACK function is activated, and

 

 

 

 

 

the tape stops in the recording standby mode. (When PAUSE is

 

 

 

 

 

released, the tape runs up and recording starts.)

 

 

0002

ALL

2: In addition to the menu item No.0001 (REC-P) function, the AUTO

 

 

 

 

 

BACK function is activated in the REC PLAY mode, the tape runs up

 

 

 

 

 

immediately, and recording starts.

 

 

 

 

 

160

MEMORY MODE

 

 

For setting the repeat playback mode.

 

 

0000

OFF

0: No repeat playback (normal operation).

 

 

0001

M-STOP

1: The tape stops near the BEGIN point when it is fast forwarded or

 

 

 

 

 

rewound.

 

 

0002

REPT1

2: When the tape reaches the END point, it is rewound to the BEGIN point

 

 

 

 

 

where it stops.

 

 

0003

CONT

3: When the tape reaches the END point, it is rewound to the BEGIN point

 

 

 

 

 

and played, and this process is repeated.

 

 

 

 

 

161

BGN PRESET

 

 

For setting the BEGIN point in the repeat playback mode. The counter

 

(CTL or TC)

 

 

display mode is set to either TC or CTL by the COUNTER button.

 

 

 

 

When the BEGIN point is not set, “--:--:--:--” appears on the display, and

 

 

 

 

the beginning of the tape serves as the BEGIN point.

 

 

 

 

 

162

END PRESET

 

 

For setting the END point in the repeat playback mode. The counter

 

(CTL or TC)

 

 

display mode is set to either TC or CTL by the COUNTER button.

 

 

 

 

When the END point is not set, “--:--:--:--” appears on the display, and the

 

 

 

 

tape end serves as the END point.

 

 

 

 

 

163

REPT MODE

 

 

For setting what image is to be output when the tape returns to the BEGIN

 

 

 

 

point in the repeat playback mode.

 

 

0000

FREEZE

0: The tape returns to the BEGIN point while the playback image at the

 

 

 

 

 

END point remains frozen.

 

 

0001

BLACK

1: The tape returns to the BEGIN point while the picture remains black.

 

 

0002

SW

2: The tape returns to the BEGIN point in accordance with the TAPE/EE

 

 

 

 

 

switch setting.

 

 

 

 

<Note>

 

 

 

 

If the END point is set at the tape end when “0: FREEZE” has been

 

 

 

 

selected, the playback image will not be frozen properly. Set the END

 

 

 

 

point within the range of the tape where images are recorded.

 

 

 

 

 

180

BATTERY SEL

 

 

For setting the battery type.

 

 

0000

NiCd12

0:

12 V type of battery

 

 

0001

NiCd13

1:

13 V type of battery

 

 

0002

NiCd14

2:

14 V type of battery

 

 

 

 

 

 

The underlining denotes the factory mode.

28