Setup Menus
TIME CODE
| Item |
| Setting |
| |
|
|
|
| Description of setting | |
No. | Superimposed | No. | Superimposed | ||
| |||||
display | display |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
511 | DF MODE |
|
| For setting the DF or NDF mode for CTL and TCG. | |
|
| 0000 | DF | 0: The drop frame mode is used. | |
|
| 0001 | NDF | 1: The | |
|
|
|
| <Note> | |
|
|
|
| The drop frame mode setting is valid when the REMOTE/MENU/LOCAL | |
|
|
|
| switch is at the LOCAL position and ENA has been selected as the menu | |
|
|
|
| item No.001 (LOCAL ENA) setting. | |
|
|
|
|
| |
512 | TC OUT REF |
|
| For setting the signals to whose phase the phase of the time code which is | |
|
|
|
| output from the TC OUT connector is to be aligned in response to the | |
|
|
|
| external LTC input when EXT has been selected as the menu item No.520 | |
|
|
|
| (TC MODE SW) setting. (Only in the | |
|
| 0000 | VOUT | 0: For aligning with the output video signal. | |
|
| 0001 | TC_IN | 1: For aligning with the external time code input signal. | |
|
|
|
|
| |
520 | TC MODE SW |
|
| For setting the time code which will serve as the reference during | |
|
|
|
| recording. | |
|
| 0000 | INT | 0: Time code generated by the internal time code generator | |
|
| 0001 | EXT | 1: External time code | |
|
|
|
|
| |
530 | TC PRESET |
|
| For setting the time code value of the internal time code generator. | |
|
|
|
| 00000000 to 23595929 | |
|
|
|
|
| |
531 | UB PRESET |
|
| For setting the user’s bit value of the internal time code generator. | |
|
|
|
| 00000000 to FFFFFFFF | |
|
|
|
|
|
The underlining denotes the factory mode.
31