Setup Menus
VIDEO
| Item |
| Setting |
| |
|
|
|
| Description of setting | |
No. | Superimposed | No. | Superimposed | ||
| |||||
display | display |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
603 |
|
| For setting whether to mute the video output signal when a blank part of | ||
|
|
|
| the tape has been detected during playback. | |
|
| 0000 | 0: The video output signal is not muted (the image is frozen). | ||
|
| 0001 | GRAY | 1: The video output signal is muted (the screen is turned gray). | |
|
|
|
|
| |
620 | DOWNCON |
|
| For setting the image processing which is to be performed during down- | |
| MODE |
|
| conversion. | |
|
| 0000 | FIT_V | 0: Side cut mode | |
|
| 0001 | FIT_H | 1: | |
|
| 0002 | FIT_HV | 2: Squeeze mode | |
|
| 0003 | 14:9 | 3: Semi | |
|
| 0004 | 13:9 | 4: Semi | |
|
|
|
| <Note> | |
|
|
|
| While the setting is being adjusted, the sound output will be muted; | |
|
|
|
| however this is normal and not indicative of a problem. When the | |
|
|
|
| adjustment is finished, sound will be output. | |
|
|
|
|
| |
645 | D/C ENH |
|
| For setting whether to enhance the contours during | |
|
| 0000 | OFF | 0: The contours are not enhanced. | |
|
| 0001 | ON | 1: The contours are enhanced. | |
|
|
|
|
| |
672 | V OUT SETUP |
|
| For setting the setup processing for the composite output signal. | |
|
| 0000 | THRU | 0: The original signal is output as is. | |
|
| 0001 | ADD22L | 1: A 7.5% setup is added from line 22 of the output signal and output. | |
|
| 0002 | ADD21L | 2: A 7.5% setup is added from line 21 of the output signal and output. | |
|
| 0003 | ADD20L | 3: A 7.5% setup is added from line 20 of the output signal and output. | |
|
|
|
|
| |
673 | EDH |
|
| For setting whether to superimpose EDH onto the SD SDI output. | |
|
| 0000 | OFF | 0: EDH is not superimposed. | |
|
| 0001 | ON | 1: EDH is superimposed. | |
|
|
|
|
|
The underlining denotes the factory mode.
32