Setup Menus
OPERATION
| Item |
| Setting |
|
|
|
|
|
|
| Description of setting |
No. | Superimposed | No. | Superimposed |
| |
|
| ||||
display | display |
|
| ||
|
|
|
| ||
|
|
|
|
| |
|
|
|
|
| |
101 | SHTL MAX |
|
| For setting the maximum shuttle mode speed when using the external | |
|
|
|
| controller connected to the | |
|
| 0000 | X8.4 | 0: | 8.4a normal speed |
|
| 0001 | X16 | 1: | 16a normal speed |
|
|
|
|
| |
104 | REF ALARM |
|
| For setting whether the warnings are to be indicated when the REF VIDEO | |
|
|
|
| has not been connected. | |
|
| 0000 | OFF | 1: No warnings are indicated. | |
|
| 0001 | ON | 2: Warnings are indicated by the STOP lamp which flashes. | |
|
|
|
|
| |
106 | EJECT EE SEL |
|
| For setting the video and audio output statuses when the tape is ejected. | |
|
| 0000 | EE | 0: The signals are always output in the | |
|
|
|
|
| playback) mode regardless of the position of the TAPE/EE switch. |
|
| 0001 | BLANK | 1: The output status changes according to the position of the TAPE/EE | |
|
|
|
|
| switch. |
|
|
|
|
| EE : The signals are output in the |
|
|
|
|
| TAPE : A blank is output for the video signals, and the audio signals are |
|
|
|
|
| muted. |
|
|
|
|
| |
110 | AUTO REW |
|
| For setting whether the tape is to be rewound automatically to its start | |
|
|
|
| when the | |
|
| 0000 | OFF | 0: The tape is not rewound. | |
|
| 0001 | ON | 1: The tape is rewound to its start. | |
|
|
|
|
| |
112 | FRZ MODE SEL |
|
| For setting the video output when the mode has moved from playback | |
|
|
|
| images to the STANDBY OFF (half loading) mode. | |
|
| 0000 | DIS | 0: The video output is muted. | |
|
| 0001 | STBOFF | 1: The playback image appearing at the moment when the STANDBY OFF | |
|
|
|
|
| (half loading) mode is established is frozen and output. |
|
|
|
|
| |
114 | REC INH LAMP |
|
| For setting the REC INHIBIT lamp operation when the cassette is set to the | |
|
|
|
| accidental erasure prevention mode. | |
|
| 0000 | LIGHT | 0: The lamp lights. | |
|
| 0001 | FLASH | 1: The lamp flashes. | |
|
|
|
| <Notes> | |
|
|
|
| The REC INHIBIT lamp always lights regardless of this setting when the | |
|
|
|
| REC INHIBIT switch on the front panel is set to the ON position. | |
|
|
|
|
| |
115 | EJECT SW INH |
|
| For setting a restriction on the operation of the front panel’s EJECT button. | |
|
| 0000 | REC | 0: Operating the button is prohibited while the recording mode is | |
|
|
|
|
| established. |
|
| 0001 | OFF | 1: The button can be operated in any mode. | |
|
|
|
|
| |
117 | M CASSTT INH |
|
| For setting a restriction on recording onto | |
|
| 0000 | OFF | 0: Recording onto | |
|
| 0001 | ON | 1: Recording onto | |
|
|
|
|
| |
150 | SEARCH SPEED |
|
| For setting the speed at which the tape is to decelerate when the front | |
|
|
|
| panel’s search button is pressed. | |
|
| 0000 | X4.1 | 0: 4.1a normal speed | |
|
| 0001 | X8.4 | 1: 8.4a normal speed | |
|
|
|
|
| |
152 | HUMID OPE |
|
| For setting the operation to be performed when condensation has formed. | |
|
| 0000 | OFF | 0: The unit does not operate when condensation has formed. | |
|
| 0001 | ON | 1: The unit can be operated when condensation has formed but no | |
|
|
|
|
| guarantee is made that it will operate properly. |
|
|
|
| <Note> | |
|
|
|
| Due to the possibility of tape damage and other problems, select the “0: | |
|
|
|
| Unit does not operate” setting for normal operation. | |
|
|
|
|
|
|
The underlining denotes the factory mode.
27