Setup Menus

BASIC

 

Item

 

Setting

 

 

 

 

 

Description of setting

No.

Superimposed

No.

Superimposed

 

display

display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

001

LOCAL ENA

 

 

For setting the buttons which can be operated on the front panel when the

 

 

 

 

LOCAL/MENU/REMOTE switch is at the REMOTE position.

 

 

0000

DIS

0: No buttons can be operated.

 

 

0001

ST&EJ

1: Only the STOP and EJECT buttons can be operated.

 

 

0002

ENA

2: All the buttons can be operated except for COUNTER and RESET.

 

 

 

 

 

002

TAPE TIMER

 

 

For setting the time system on the CTL counter display.

 

 

0000

±12h

0: 12-hour system

 

 

0001

24h

1: 24-hour system

 

 

 

 

 

003

REMAIN SEL

 

 

For setting the superimposing of the remaining tape time and total tape

 

 

 

 

length displays for the VIDEO OUT2 connector.

 

 

0000

OFF

0: No superimposed displays

 

 

0001

2L

1: Remaining tape time is displayed on the second line.

 

 

0002

1L

2: Remaining tape time is displayed on the first line.

 

 

0003

R/TTL

3: Remaining tape time is displayed on the first line and the total tape

 

 

 

 

length on the second line.

 

 

 

 

<Notes>

 

 

 

 

O When “2L” has been selected as this item’s setting, the time will not be

 

 

 

 

displayed even if “TIME” was selected as the menu item No.006

 

 

 

 

(DISPLAY SEL) setting.

 

 

 

 

O Even when “R/TTL” has been selected as this item’s setting, the total

 

 

 

 

tape length will not be displayed if “TIME” has been selected as the

 

 

 

 

menu item No.006 (DISPLAY SEL) setting.

 

 

 

 

 

005

SUPER

 

 

For setting whether the displays are to be superimposed onto the VIDEO

 

 

 

 

OUT2 connector.

 

 

0000

OFF

0: The displays are not superimposed.

 

 

0001

ON

1: The displays are superimposed.

 

 

 

 

 

006

DISPLAY SEL

 

 

For setting what displays are to be superimposed onto the VIDEO OUT2

 

 

 

 

connector.

 

 

0000

TIME

0: Only the time display is superimposed.

 

 

0001

T&STA

1: The time and operation status are superimposed.

 

 

0002

T&S&M

2: The time, operation status and mode are superimposed.

 

 

 

 

<Note>

 

 

 

 

When “T&S&M” has been selected as this item’s setting and a warning or

 

 

 

 

error occurs, an error message is superimposed.

 

 

 

 

 

007

CHARA H-POS

0000

0

For setting the horizontal position where the superimposed display is to

 

 

:

:

appear.

 

 

0006

6

 

 

 

:

:

 

 

 

0037

37

 

 

 

 

 

 

008

CHARA V-POS

0000

0

For setting the vertical position where the superimposed display is to

 

 

:

:

appear.

 

 

0023

23

 

 

 

:

:

 

 

 

0032

32

 

 

 

 

 

 

The underlining denotes the factory mode.

<Notes>

O If the PAGE button and the DATA+ or DATA– button are pressed together when menu item No.007 (CHARA H-POS) and No.008 (CHARA V-POS) are being set, the counter display appears temporarily while these buttons are held down to enable the settings to be checked.

It is also possible to use the DATA+ button and DATA– button while holding down the PAGE button to perform the settings while at the same time checking their actual status.

O Even when “OFF” is selected as the menu item No.005 (SUPER) setting, the superimposing is displayed in accordance with the menu No.006 (DISPLAY SEL) setting while the menu settings are being performed. When the menu setting process is exited, the display accords with the menu item No.005 (SUPER) setting.

25