Setup (Initial Settings)

3 Press the MENU-UP button or MENU-DOWN button to move the cursor to the LOAD position, and press the SET button.

The VTR is set to the LOAD mode, and the LOAD screen is displayed on the video monitor.

SET–UP MENU

<LOAD>

2NO FACTORY USER (ALL)

USER (NOT SYSTEM)

4 Press the MENU-UP button or MENU-DOWN button to move the cursor to FACTORY, and press the SET button.

O If the cursor is moved to FACTORY and this operation is performed, the factory settings are restored for all the menus with the exception of the SYSTEM menu.

O If the cursor is moved to NO and this operation is performed, operation returns to the menu screen without restoring the factory settings.

5 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

This completes the menu settings.

How to set the user defaults

1 Set the LOCAL/MENU/REMOTE switch to the MENU position.

The VTR is set to the menu setting mode, and the menu screen is displayed on the video monitor.

2 Perform steps 2 through 6 in “How to perform settings using the on-screen menu,” and change to the desired settings.

3 Press the RESET button.

The VTR is set to the default setting mode, and the default setting screen is displayed on the video monitor.

SELECT MODE

2 0 ESCAPE

1LOAD

2SAVE

3PROTECT

4

5

6

7

Press the MENU-UP button or MENU-DOWN button to move the cursor to the SAVE position, and press the SET button.

The VTR is set to the SAVE mode, and the SAVE screen is displayed on the video monitor.

SET–UP MENU

<SAVE>

2NO

USER (ALL)

USER (NOT SYSTEM)

Press the MENU-UP button or MENU-DOWN button to move the cursor to USER (ALL), and press the SET button.

O If the cursor is moved to USER (NOT SYSTEM) and this operation is performed, the settings are updated for all the menus with the exception of the SYSTEM menu.

O If the cursor is moved to NO and this operation is performed, operation returns to the menu screen without updating the settings.

The screen on which SAVE is checked now appears. Press the MENU-UP button or MENU-DOWN button to move the cursor to the YES position, and press the SET button.

The settings are now stored in the memory.

SAVE OK?

2NO YES

Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

This completes the menu settings.

21