Parts and their functions (continued)
SD SERIAL COMPONENT AUDIO VIDEO OUT connector
These are output connectors for the digital component audio/video signal conforming to the SMPTE
They are output during DVCPRO50, DVCPRO, DV or DVCAM interchangeable playback or when signals are
IEEE1394 digital input/output connector
This unit is capable of input and output through a digital interface conforming to the IEEE1394 standard. Use 6- pin connectors. Does not support bus power.
<Note>
When in 23.98/24 Hz mode, SD SDI output, the system phase of analog composite video output may change to match the phase of HD SDI output when tape speed is at the standard rate.
Reference signals
During tape playback, the video output reference signals are as shown in the table below.
In the 59.94 Hz/60 Hz or 50 Hz mode
Input signals |
| Menu item No.031 |
| |||
|
|
|
|
|
|
|
REF_IN | INPUT | AUTO | HD_REF | SD_REF | INPUT*1 | |
HD_REF_IN |
| Input | HD_REF_IN | HD_REF_IN | Internal SD | INPUT |
|
|
|
|
|
| |
| Not input | HD_REF_IN | HD_REF_IN | Internal SD | Internal HD | |
|
| |||||
|
|
|
|
|
|
|
SD_REF_IN |
| Input | SD_REF_IN | Internal HD | SD_REF_IN | INPUT |
|
|
|
|
|
| |
| Not input | SD_REF_IN | Internal HD | SD_REF_IN | Internal SD | |
|
| |||||
|
|
|
|
|
| |
None | Not input | Internal HD | Internal HD | Internal SD | Internal HD | |
|
|
|
|
|
|
|
*1 If “1394” or “INT SG (internal standard signal)” is selected for the video input signal, the video output reference signal will always be “Internal HD.”
<Notes>
zWhen
zWhen using the SD > HD
In the 23.98 Hz/24 Hz mode
Input signals |
|
|
|
|
|
|
|
|
|
REF_IN |
|
|
|
|
|
|
|
|
|
HD_REF_IN | HD_REF_IN |
|
|
|
|
|
|
|
|
None | Internal HD |
|
|
|
|
|
|
|
|
In the 25 Hz (HD), 25 Hz (SD), 50 Hz (HD) or 50 Hz (SD) mode |
| |||
|
|
|
|
|
Input signals |
| Menu item No.031 |
| |
|
|
|
|
|
REF_IN | AUTO | HD_REF | SD_REF | INPUT |
|
|
|
|
|
|
|
|
|
|
HD_REF_IN | HD_REF_IN | HD_REF_IN | Internal SD | Internal HD |
|
|
|
|
|
SD_REF_IN | SD_REF_IN | Internal HD | SD_REF_IN | Internal HD |
|
|
|
|
|
None | Internal HD | Internal HD | Internal SD | Internal HD |
|
|
|
|
|
<Notes>
zIn the 25 Hz (HD) or 50 Hz (HD) mode, black signals are output from the SD SDI output and analog composite output connectors.
zIn the 25 Hz (SD) or 50 Hz (SD) mode, black signals are output from the HD SDI output and analog component output connectors.
zAll the HD SDI output, SD SDI output, video output, analog component output, audio output and TC output signals are output in phase with the REF input.
Internal HD:
With HD tape playback as the reference, operation uses a 74 MHz clock signal in the
Internal SD:
With SD tape playback as the reference, operation uses a 4fsc clock signal in the
16