Setup (initial settings) (continued)

3 Incline the joystick up and down to adjust the cursor in the default settings screen to the “LOAD” position and press the joystick. The mode for this unit changes to the LOAD mode, the LOAD screen is displayed on the video monitor, and the item name is displayed in the counter display.

SETUP-MENU <LOAD>

¢NO FACTORY USER(ALL)

USER(NOT SYSTEM)

Setting the user defaults

1 Press the MENU button.

A select screen for major menu items is displayed on the video monitor, and the names are displayed in the counter display.

2 Follow the procedure described in “Setting method using the on-screen menus” 2–6and adjust the desired settings.

3 Press the RESET button.

The mode for this unit will change to the default setting mode, and the default setting screen will be displayed on the video monitor.

4 Incline the joystick up and down to adjust the cursor in the LOAD screen to the “FACTORY” position and press the joystick.

zIf this operation is made after moving the cursor to “FACTORY,” values for all menus except the SYSTEM menu will return to the factory settings.

zWhen the cursor is moved to “NO” and this operation is performed, the display returns to the menu screen without restoring the factory settings.

5 The confirmation screen is displayed on the video monitor.

zPress the PLAY button to save the change of the set value.

zPress the STOP button to cancel the change of the set value.

SETUP-MENU <LOAD>

FACTORY OK?

YES<PLAY>/NO<STOP>

SELECT MODE

¢0 ESCAPE

1 LOAD

2 SAVE

3 PROTECT

4 Incline the joystick up and down to adjust the cursor in the default settings screen to the “SAVE” position and press the joystick.

The mode for this unit changes to the SAVE mode, the SAVE screen is displayed on the video monitor, and the item name is displayed in the counter display.

SET-UP MENU <SAVE>

¢NO USER1(ALL) USER2(ALL) USER3(ALL)

USER1(NOT SYSTEM) USER2(NOT SYSTEM) USER3(NOT SYSTEM)

6 Press the MENU button.

zWhen the set value is not changed, the display of the menu screen disappears.

zWhen the set value is changed, a confirmation screen will be displayed.

zPress the PLAY button to save the change of the set value.

zPress the STOP button to cancel the change of the set value.

SETUP-MENU SET OK?

YES<PLAY>/NO<STOP>

5 Incline the joystick up and down to adjust the cursor on the SAVE screen to the “USER ¢ (ALL)” position (¢ each value from 1 to 3.) and press the joystick.

zWhen storing a set value other than SYSTEM menu in memory, move the cursor to “USER ¢ (NOT SYSTEM)” (¢ each value from 1 to 3.) and press the joystick.

zTo cancel the operation, move the cursor to “NO” and press the joystick.

6 Confirmation screen for SAVE is displayed.

zPress the PLAY button to save the setting.

zPress the STOP button if the set value is not saved.

SET-UP MENU <SAVE>

USER1(ALL) OK?

YES<PLAY>/NO<STOP>

28