Panasonic AJ-HD1400P INTERFACE, (continued)

Setup menus (continued)

OPERATION (continued)

No./Item		Description of setting
181*1	For setting (in increments of 0.1 V) the voltage level at
TYPE-A	which the counter flashes as warning for TYPE-A
	battery (selected as the menu item No.180 BATTERY
NEAR
	SEL item).
	Use when adjusting the settings for multiple batteries
	or new type batteries.
	0000	10.6
	:	:
	0023	12.9
	:	:
	0044	15.0
	<Note>
	When this item has been set to a voltage level close
	to 15.0 V, the counter display may flash even when an
	AC power source is being used.
182*1	For setting (in increments of 0.1 V) the voltage level at
TYPE-A END	which the TYPE-A battery (selected as the menu item
	No.180 BATTERY SEL item) is to be automatically
	turned off.
	Use when adjusting the settings for multiple batteries
	or new type batteries.
	0000	10.6
	:	:
	0018	12.4
	:	:
	0034	14.0
183*1	For setting (in increments of 0.1 V) the voltage level at
TYPE-B	which the counter flashes as warning for TYPE-B
	battery (selected as the menu item No.180 BATTERY
NEAR
	SEL item).
	Use when adjusting the settings for multiple batteries
	or new type batteries.
	0000	10.6
	:	:
	0023	12.9
	:	:
	0044	15.0
	<Note>
	When this item has been set to a voltage level close
	to 15.0 V, the counter display may flash even when an
	AC power source is being used.
184*1	For setting (in increments of 0.1 V) the voltage level at
TYPE-B END	which the TYPE-B battery (selected as the menu item
	No.180 BATTERY SEL item) is to be automatically
	turned off.
	0000	10.6
	:	:
	0018	12.4
	:	:
	0034	14.0
190*2	For selection of the video input switching mode with
V IN SEL INH	the INPUT SELECT switch.
	0000	OFF :
	Video input switching with the INPUT SELECT
	switch is enabled.
	0001	ON :
	Video input switching with the INPUT SELECT
	switch is prohibited.
	0002	REC :
	After this unit shifts to recording (except editing),
	video input switching with the INPUT SELECT
	switch is prohibited.

No./Item		Description of setting
191*2	Select the audio input switching mode with the INPUT
A IN SEL INH	SELECT switch.
	0000	OFF :
	Select the audio input switching mode with the
	INPUT SELECT switch.
	0001	ON :
	Video input switching with the INPUT SELECT
	switch is prohibited.
	0002	REC :
	After this unit shifts to recording (except editing),
	video input switching with the INPUT SELECT
	switch is prohibited.

*1 Even if the RESET button is pressed while pressing the SEARCH button, the value may not return to the factory setting.

*2 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

INTERFACE

No./Item Description of setting

202For setting the ID information to be returned to the

ID SEL	controller.
	0000	OTHER :
	The ID information of the VTR other than DVCPRO
	is set.
	0001	DVCPRO :
	The DVCPRO ID information is set.
	0002	ALL :
	Set this only when the unit is connected to a
	Panasonic controller (such as the AG-A850,
	optional accessory).
	<Note>
	Select 1 (DVCPRO) or 2 (ORIG) if “23/24,” “25(HD),”
	“25(SD),” “50(HD)” or “50(SD)” is selected as the
	menu item No.25 SYSTEM FREQ setting.

“_____” indicates the factory setting.

43