Chapter 4 Adjustments and settings for recording (continued)
Display item | What is displayed | Status when display appears |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
; Information | INH |
| “INH” is indicated when the operation of the USER button has been |
|
|
allocated to USER |
|
| disabled. |
|
|
buttons | S.GAIN | ¢¢dB/OFF | This indicates the value selected for S.GAIN. |
|
|
UM: USER MAIN | DS.GAIN ¢¢:/OFF | This indicates the value selected for DS.GAIN. |
|
| |
U1: USER1 button | LINE MIX ON/OFF | This indicates whether LINE MIX GAIN is set to ON or OFF. |
|
| |
S.IRIS | ON/OFF | This indicates whether S.IRIS is set to ON or OFF. |
|
| |
U2: USER2 button |
|
| |||
I.OVR ON/OFF | This appears when the IRIS OVERRIDE setting is enabled (ON). |
|
| ||
|
|
| |||
| S.BLK | This indicates whether SUPER BLACK is set to ON or OFF and, if it is |
|
| |
| 4 | ||||
|
|
| set to ON, it also indicates its value. |
| |
| B.GAMMA ON/OFF | This indicates whether BLACK GAMMA (black level gradation |
| ||
|
|
| compensation) is set to ON or OFF. |
|
|
|
|
|
| ||
| AUDIO CH1 | This appears when the input signal to recorded on audio channel 1 |
|
| |
|
|
| has been switched. |
|
|
| AUDIO CH2 | This appears when the input signal to recorded on audio channel 2 |
|
| |
|
|
| has been switched. |
|
|
| REC SW | This appears only during MODE CHECK button operations while the |
|
| |
|
|
| USER button functions as the REC switch. |
|
|
| Y GET ON | This appears when the function for measuring the output brightness |
|
| |
|
|
| level (in % units for approx. 3 seconds for the area near the center |
|
|
|
|
| marker) is ON. |
|
|
| RET SW | This appears only during MODE CHECK button operations while the |
|
| |
|
|
| USER button functions as the RET switch. |
|
|
| DRS |
| This appears when the DRS function is turned on. |
|
|
|
|
|
|
|
|
<Extender | EX2 |
| This appears when the lens extender is in use. |
|
|
|
|
|
|
|
|
= Color temperature | ¢.¢K |
| This indicates the color temperatures assigned to the A, B, and PRE |
|
|
|
|
| positions of the WHITE BAL switch. (These may be memory values |
|
|
|
|
| during AWB operation or menu setting values.) |
|
|
|
|
|
|
|
|
> Filter positions | 1 to 4 |
| This indicates the position of the ND filter. |
|
|
| A to D |
| This indicates the position of the CC filter. |
|
|
| – |
| This indicates that the filter has not been set to a proper position. |
|
|
|
|
|
|
|
|
? WHITE BAL switch | A |
| This indicates that the WHITE BAL switch is set to channel A. |
|
|
position | B |
| This indicates that the WHITE BAL switch is set to channel B. |
|
|
| P |
| This indicates that the WHITE BAL switch is set to PRE. |
|
|
|
|
|
|
| |
@ Cumulative gain | 6:/10:/12:/15:/20: | This indicates the value of the cumulative gain (DS.GAIN) when this |
|
| |
display |
|
| gain function is working. |
|
|
|
|
|
|
|
|
A LINE MIX GAIN | M |
| This appears when LINE MIX GAIN (+6 dB) is active. |
|
|
display |
|
|
|
|
|
|
|
|
|
|
|
B Gain value | ¢¢dB |
| This indicates the current gain value. |
|
|
|
|
|
|
| |
C VTR warnings, | REC WARNING | This indicates that a problem has occurred during recording. |
|
| |
information | SLACK | This indicates that a problem has occurred in a mechanism. |
|
| |
|
|
| Depending on the nature of the trouble concerned, the power may be |
|
|
|
|
| turned off automatically. |
|
|
| HUMID |
| This indicates that condensation has formed. |
|
|
| SERVO | This indicates that servo lock has not been initiated during recording |
|
| |
|
|
| or playback. |
|
|
| RF |
| This indicates that the level of the signals from the tape has dropped. |
|
|
| BACKUP BATT EMPTY | This signals that it is time to replace the backup battery. |
|
| |
| This indicates that the level of the RF signal from the wireless |
|
| ||
|
|
| microphone receiver has dropped. |
|
|
|
|
| <Note> |
|
|
|
|
| For details on the codes displayed in this area, refer to |
|
|
|
|
| codes.” |
|
|
|
|
|
|
|
|
D Time code display | TCG | 12:59:59:20 | This indicates the TCG (time code generator) value. |
|
|
| TCR | 12:59:59:20 | This indicates the TCR (time code reader) value. |
|
|
| (V)UBG | AB CD EF 00 | This indicates the UBG VUBG display. |
|
|
| (V)UBR | 12 34 56 78 | This indicates the UBR VUBR display. |
|
|
| CTL | This indicates the |
|
| |
|
|
|
|
|
|
53