E– 11
Adjusting the Viewfinder
Detaching the Eyepiece
If dust has adhered to the CRT screen or mirror, detach the eyepiece and remove it.
<Note>
Do not wipe the mirror surface under any circumstances as it has been specially treated.
Dust which has adhered to the mirror should be blown away with a blower, etc.
Eyepiece
Lock ring
Alignment marks
1. Turn the lock ring as far as possible in
the clockwise and counterclockwise
directions to line up the alignment
marks on the lock ring and viewfinder
barrel.
2. Detach the eyepiece.
Remounting the Eyepiece
1. Line up the alignment marks on the lock ring and the viewfinder barrel and slide the
eyepiece back into place.
2. Turn the lock ring clockwise as far as the position.
LOCK