Panasonic AJ-HVF20P, AJ-HVF27P 1. , 3. , 2.

E– 7
OAdjusting the height of the mounting unit
Mounting unit
Screws
1. Detach the two screws, the detach the
mounting unit.
Screws
3. Secure the mounting unit in place with the two
screws.
2. Replace the three screws in the positions indicated as Aor Bfrom the present
positions and change the position of the metal fitting.
Adjusting the Viewfinder
Adjusting the Mounting Height of the Viewfinder
Metal fitting
Re-fix the metal fitting by fastening the screws together with the spring washer.
The mounting height of the viewfinder can be adjusted using the method described
below.
Adjust the height of the mounting unit as required.
OAt the time of shipping, the mounting height is set for use with the AJ-HDC20A and
AJ-HDC27A models.