Avaya 1.3 manual Removing Cvlan Client Software, Verifying UnixWare Client Software Installation

Using CVLAN

Verifying UnixWare Client Software Installation

1.At the command prompt, run "asai_test -m <server> <link number>" where <server> is the name or IP address of the CVLAN server and

<link number> is the number of the link on that server.

2.It should respond with a "successful" message.

If it fails, check the TCP connectivity with ping, and the server link status by using the DEFINITY G3PD Administrator utility.

For information about using the Link Status command, see "Link Status Command" in Chapter 3 of Avaya Computer Telephony G3 PBX Driver and CVLAN Administration and Maintenance (DEFNETM.PDF).

Removing CVLAN Client Software

This section contains instructions for removing CVLAN client software from Windows NT, Windows 2000, Solaris SPARC and UnixWare client workstations.

Uninstalling Windows Client Software

Use the standard Windows removal procedure to uninstall the CVLAN client software.

1.From the desktop click Start, point to Settings and click Control Panel.

2.From the Control Panel, click Add/Remove Programs.

Windows displays the Add/Remove Programs Properties dialog box.

3.Select Avaya Computer Telephony CVLAN client, and click Add/Remove.

The uninstall program removes the software and displays an Information box indicating that the program and all of its components have been removed.

4.Click Finish.

This completes the procedure to remove a software program from a Windows machine.

146 Installation Guide