Avaya 1.3 manual Type change node-names

DEFINITY ONE Pre-Administration — Setting Up Your Avaya CT Configuration

8.Type change node-names

The NODE NAMES screen appears.

9.Follow steps a and b to complete the NODE NAMES screen and define the Avaya CT server’s name and address.

a.In the Name: field, type the name you want to assign to the Avaya CT server (free- form field)

b.In the IP Address: field, type the IP address of the G3PBX Driver (default is 192.128.25.20)

10.Type add data-modulemodname (substitute modname with the name of your data module. For example modul02).

The DATA MODULE screen appears.

11.Follow steps a through e to complete the DATA MODULE screen.

a.In the Data Extension: field, type any valid extension on the dial plan (for example, 20000).

b.In the Type: field, type ethernet

c.In the Port: field, type 01A1017, where:

●01A10 is for the C-LAN board slot (in this example)

●017 is the port (must always be port 17)

d.In the Link: field, type any number from 1 to 25

e.In the Name: field, type the name you want to assign to the Avaya CT server (free- form field)

Issue 1 October 2003 245