Avaya 1.3 manual System Configuration

Administrative Tasks for Avaya Platforms That Use the MAPD

4.Type list configuration software-versions The SOFTWARE VERSIONS screen appears.

5.Check the SOFTWARE VERSION to verify that the correct DEFINITY software version is running on the switch. The following versions are appropriate: G3V4, or later.

Note:

G3V4 requires a field maintenance release.

6.Type list config all to determine what ports are available on the MAPD for adding a station.

The SYSTEM CONFIGURATION screen appears.

Under Assigned Ports, each u represents an available or unassigned port.

list configuration all Page 1

----------------------------------------------------------------------

		SYSTEM CONFIGURATION
Board
Number	Board Type	Code	Vintage			Assigned Ports
1A01	EXPANSION INTF	TN776	000001
1A02	EXPANSION INTF	TN776	000001
1A03
1A04	RESERVED LGATE	TN801	MAPD	u	u	u u	u u	u u
1A05	RESERVED LGATE	TN801	MAPD	u	u	u u	u u	u u
1A06	MAPD BOARD	TN801	000001	01	u	u u	u u	u u
				u	u	u u	u u	u u
				u	u	u u	u u	u u
				u	u	u u	u u	u u

7.Choose a port associated with the MAPD board to add a station to the DLG (on the MAPD).

8.Type add cti-link <n> (where n represents the link number) The LINK screen appears.

Issue 1 October 2003 45