Avaya 1.3 manual Pkgadd -d /mountpoint/client/tsapi/unixware/nwtslib.spl, Umount /dev/cdrom/device

Installing UnixWare Client Software

5.At the command prompt, enter the pkgadd command. The pkgadd command format is as follows:

pkgadd -d /mountpoint/client/tsapi/unixware/nwtslib.spl

where mountpoint is the name of an existing directory (such as /cdrom1 or /CD-ROM_1) on which to mount the CD-ROM. (Note that the full pathname, beginning with a ’/’, is required.)

6.The system now displays a list of the packages in the spool file. Press <Enter> to select the nwtslib package.

7.Specify the transport type.

UnixWare clients can use either IPX/SPX or TCP/IP as their network transport. The system displays a list of transports and the following message:

Please specify a transport type for the Telephony Services library. (To access Windows NT, Windows 2000 or Windows XP Telephony Servers, you must select "tcp.")

spxIPX/SPX Protocol tcpTCP/IP Protocol

Select a transport type [?,??]

Type "s" for IPX/SPX or "t" for TCP/IP; then press <Enter>.

Note:

This release of Telephony Services for Windows NT, Windows 2000, Windows XP only supports TCP/IP as a network protocol; you must select TCP/IP even though both options appear on the screen.

8.The pg command displays the Telephony Services "readme" file, tslib.readme.

This file contains information about changes that were made after the manuals were completed.

9.The installation is complete. Unmount the CD-ROM. The umount command format is as follows:

umount /dev/cdrom/device

where device specifies the CD-ROM drive that contains the Telephony Services installation disk. You may now remove the CD-ROM.

Note:

If TCP/IP is selected for the transport type, a template file called /usr/lib/ tslibrc is created during installation. For more information, see Editing the Template File -- tslibrc on page 118.

Issue 1 October 2003 113