![](/images/new-backgrounds/1110512/110512111x1.webp)
Administering the Switch
CTI Link Administration on Configurations with CLAN Connectivity
This procedure assumes that you are running the appropriate level of software. Follow these steps from the system access terminal (SAT) to administer a CTI link (Link Type:
Note:
This procedure applies only to DEFINITY ONE/IP600 and Avaya S8100 Media Server configurations. It does not apply to S8300 Media Server configurations.
1.Type list configuration
2.Type display
Verify that the Processor Ethernet? option field, is set to y.
3.Type display
Verify that the
4.Type display
Verify that Computer Telephony Adjunct Link is set to y.
5.Type change
a.In the Enable Eth Pt option field, type y
b.In the Type option field, type
c.In the Net Rgn option field, type 1 or the appropriate Network region
d.In the Node Name option field, type the
e.In the Subnet Mask option field, type the
f.In the Gateway option field, type the <Router’s IP address>
6.Type change
a.In the Name option field, type <the TServer’s Hostname>
b.In the IP Address option field, type <the TServer’s IP Address>
7.Type add
a.In the Type field, type ethernet
1Page numbering is relative on the OPTIONS form. The total page count is affected by the options your system is configured with. For example, if you have ASAI Core but neither ASAI Plus nor Computer Telephony Adjunct Links, your total page count diminishes by one (4 of 9 instead of 4 of 10).
56 Installation Guide