Appendix D: Pre-Release 11 Link Administration Instructions

The following instructions apply to a Release 10 or earlier switch.

Introduction

This appendix describes DEFINITY-based tasks that must be performed to implement communications between the DEFINITY switch and the Avaya Computer Telephony server.

Scope of this appendix

Refer to Figure D-1 as you read this section. The scope of this appendix includes the DEFINITY switch and the communications interface to the Avaya CT server. The affected components are as follows.

The DEFINITY switch (DEFINITY ECS, DEFINITY PROLOGIX, or DEFINTY ONE)

DEFINITY LAN Gateway (DLG) on either a Multi-Application Platform for DEFINITY (MAPD) or a DEFINITY ONE.

Note:

Hardware Platforms that accommodate the DLG software are:

-TN800 series MAPD, which is used in a DEFINITY ECS or DEFINITY PROLOGIX.

-TN795 Processor Card (PROCR), which is used in the DEFINITY ONE. The PROCR accommodates the DLG. Also, in some configurations, the TN795 card (with DLG resident) relies on the TN799 Control LAN (C-LAN) card for LAN isolation.

Issue 1 October 2003 223

Page 223
Image 223
Avaya 1.3 manual Introduction, Scope of this appendix