Administering the Switch

Task 1: Administering a Link

This section applies to the following platforms, which rely on the MAPD-based DLG.

DEFINITY Servers CSI, SI, and R

Avaya MultiVantage S8700 Media Server for Multi-Connect Configurations

Avaya MultiVantage S8700 Media Server for IP-Connect Configurations

The objective of Task 1 is administering a link. From the DEFINITY SAT, follow these steps to complete Task 1.

Note:

Whenever you use the change form of a DEFINITY SAT command, you must log out for the changes to take effect.

1.Log in to the DEFINITY switch.

2.Type display system-parameters customer-options

The OPTIONAL FEATURES screen appears.

3.Check Computer Telephony Adjunct Links? and make sure it is set to y, (page 2 of the OPTIONAL FEATURES screen in the example above). This setting indicates that DEFINITY is capable of communicating with an adjunct.

Note:

If this field is not set to "y" then contact your Avaya Account Representative.

44 Installation Guide

Page 44
Image 44
Avaya 1.3 manual Task 1 Administering a Link, Type display system-parameters customer-options