Avaya 1.3 manual Checklists for Definity ONE Before You Install Avaya CT

Pre-Release 11 Link Administration Instructions

12.Type change ip-services

The IP SERVICES screen appears.

13.Follow steps a through e to complete the IP SERVICES screen, and administer the DLG link as a DEFINITY ONE system.

a.In the Service Type: field, type ADJLK1 (DEFINITY ONE uses link 1 only)

b.In the Local node: field, type clan1

c.In the Local port: field, type 5678

d.In the Remote node: field type the name you assigned to the Avaya CT server in Step 8a (NODE NAMES screen).

e.In the Remote port: field type 0 (zero). Remote port is always set to zero.

This completes the procedure for setting up C-LAN connectivity to DEFINITY ONE. For a checklist of these administrative tasks, see Table D-3 on page -247.

Checklists for DEFINITY ONE

— Before You Install Avaya CT

The checklists in this section enable you to verify that you have completed the switch- based tasks on DEFINITY ONE. Use the checklist that is appropriate for your configuration.

●Checklist for DEFINITY ONE with TN795 PROCR (Option 1)

●Checklist for DEFINITY ONE withTN799 C-LAN (Option 2)

Checklist for DEFINITY ONE with TN795 PROCR (Option 1)

If you have a DEFINITY one with a TN795 PROCR, make sure you have completed these tasks before you install Avaya CT.

246 Installation Guide