Pre-Release 11 Link Administration Instructions

10.Type change node-names

The NODE NAMES screen appears.

11.Follow steps a and b to complete the NODE NAMES screen and define the Avaya CT server’s name and address.

a.In the Name: field, type the name you want to assign to the Avaya CT server (free- form field)

b.In the IP Address: field, type the IP address of the G3PBX Driver (default is 192.128.25.20)

12.Type change ip-services

The IP SERVICES screen appears.

13.Follow Steps a through e to complete the IP SERVICES screen and administer the DLG link on a DEFINITY ONE system.

a.In the Service Type: field, type ADJLK1 (DEFINITY ONE uses link 1 only)

b.In the Local node-option:field, type procr

c.In the Local port: field, type 5678

d.In the Remote node: field, type the name you assigned to the Avaya CT server on the NODE NAMES screen.

e.In the Remote port: field, type 0 (zero). Remote port is always set to zero.

This completes the procedure for setting up PROCR connectivity to DEFINITY ONE. For a checklist of these administrative tasks, see Table D-2 on page -247.

242 Installation Guide

Page 242
Image 242
Avaya 1.3 manual Type change node-names, Type change ip-services