Avaya 1.3 manual Installing UnixWare Client Software, Installing from Command Line

Installing Avaya Computer Telephony TSAPI Client Software

Installing UnixWare Client Software

The Telephony Services client software for UnixWare can be installed from a command line, from a CD, or from diskettes.

Installing from Command Line

The Telephony Services software is installed from the command line via the UnixWare pkgadd command. To do this, you must be logged on as root. Desktop users should open a "Terminal" window.

Note:

For a detailed description of the pkgadd command, refer to your UnixWare documentation.

Installing from the CD

Follow these steps to install the UnixWare client from the CD.

1.Become super-user (root): su

2.Enter the root password when prompted.

3.Insert the Telephony Services CD-ROM into your workstation CD-ROM drive.

4.At the command prompt, mount the CD-ROM. The mount command format is as follows:

mount -F cdfs -r /dev/cdrom/device /mountpoint

Note: For UnixWare 7.x, use this format

mount -F cdfs -r -onoextend /dev/cdrom/device /mountpoint

where device specifies the CD-ROM drive that contains the Telephony Services installation disk and mountpoint is the name of an existing directory

(such as /cdrom1 or /CD-ROM_1) on which to mount the CD-ROM. You can use the ls command to find the appropriate names for your system.

Note:

Desktop users may find it easier to mount the CD-ROM by double-clicking on the CD-ROM icon in the "Disks-etc" folder.

112 Installation Guide