DEFINITY ONE Pre-Administration — Setting Up Your Avaya CT Configuration

IP Address of DEFINITY G3 PBX Driver on

Avaya CT Server (Applies to Either Configuration

Option)

Verify that you have a local IP address for the DEFINITY G3 PBX Driver on your Telephony Server. You will need this IP address for installing the DEFINITY G3 PBX Driver. You may obtain this address from the Network Administrator or you may use the default address provided in the installation program (192.168.25.20) if you have a private LAN (as recommended) between the Telephony Server and the DEFINITY ONE. This local IP address should be different from the IP address used for the G3PBX Driver on the Avaya CT server.

Procedure for Setting Up TN795 PROCR to DEFINITY ONE (Option 1)

If you are connecting to a DEFINITY via a PROCR running the DLG, follow this procedure.

Note:

Whenever you use the change form of a DEFINITY ONE SAT command, you must log out for the changes to take effect.

1.Log in to the DEFINITY ONE switch.

2.Type list configuration software-versions

The SOFTWARE VERSIONS screen appears.

3.Check the SOFTWARE VERSION, to ensure that the correct DEFINITY ONE software version is running on the switch. The following version is appropriate: G3V8c, or later.

Issue 1 October 2003 239

Page 239
Image 239
Avaya 1.3 manual Procedure for Setting Up TN795 Procr to Definity ONE Option, Type list configuration software-versions