Using CVLAN

3.Select the current IP address (135.20.70.6), and overwrite it with the IP address you want to use. Click OK.

The system displays the Warning dialog box (overwriting deletes the previous client).

4.Verify that this IP address of the client that you want to edit and click Yes. This completes the procedure to edit (and remove) a client.

Starting the CVLAN Server

This section describes the following methods for starting the CVLAN server:

Starting CVLAN with the Telephony Services Controller — this procedure starts both the Telephony Services server (Tserver) and the CVLAN server. This is the recommended method.

Starting CVLAN from the Windows operating system — this procedure starts the CVLAN server only. Use this method to start the CVLAN server independently of the Tserver.

Starting the CVLAN Server with the

Telephony Services Controller

Follow these steps to start the CVLAN server from the Telephony Services controller (this procedure starts both the Tserver and the CVLAN server).

132 Installation Guide

Page 132
Image 132
Avaya 1.3 manual Starting the Cvlan Server with Telephony Services Controller