Panasonic AJ-PD900W - page 30

–30–

Adjusting the Lens Flange

When images are not clearly focused at both the telephoto and wide-angle positions during

zoom operations, adjust the flange back (the distance from the lens mounting surface to the im-

age formation surface).

Once adjusted, the flange back does not need to be readjusted as long as the lens is not

changed.

Adjustment method

Check the position of each part of the lens which must be operated in order to adjust the flange

back with the lens Handling Instructions.

Adjusting the Flange Back

1Set the lens iris to manual.

2Open the iris. Position the flange back adjustment chart about 3 m from the lens and illumi-

nate it so that an appropriate image output level is obtained.

If the image level is too high, use the CC/ND filters or the shutter.

3Loosen the Ff ring clamping screw.

4Set the zoom ring to the telephoto position manually or by electric drive.

5Shoot the flange back adjustment chart and turn the distance ring to bring the chart into

focus.

6Set the zoom ring to the wide-angle position.

7Turn the Ff ring to bring the chart into focus.

At this time, take care not to move the distance ring.

8Repeat this operation four to seven times until the lens is in focus at both the telephoto and

wide-angle positions.

9Firmly tighten the Ff ring clamping screw.

¡Refer to the Operating Instructions of the lens.

Approx. 3 m

Contents

Main For your safety CAUTION: WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Page Contents General and Features Features of the Camera Section Page Page Features Features of the VTR section Page Power Supply Section Accessory Mounting Section Audio Function Section (1) Audio Function Section (2) Audio Function Section (3) Shooting (Recording)/Playback Function Section (1) Shooting (Recording)/Playback Function Section (2) Shooting (Recording)/Playback Function Section (3) Shooting (Recording)/Playback Function Section (4) Page Menu Operation Section Time Code-Related Section (1) Time Code-Related Section (2) Warning/Status Display Section Page Page Page Page Page Page Page Page Page 7 8 9 10 Page Page Detaching the Eyecup 1 2 3 Remounting the eyecup Page Page Page Page Page Page Page Page Page Page Connecting the AQ-EC1 Extension Control Unit (Option) Displaying the Setting Menu Inside the Viewfinder Setting Menu Configuration Changing the setting menu configuration Page Selecting the desired item 1 Changing the settings Changing the ON/OFF selection Returning to the default settings Quitting the menu Page Lamp Displays Inside the Viewfinder Setting the ! Lamp Display 2 3 4 EX S OFF 30-25 14.6V 1 A 0dB F5.6------- 1 2 3 4 5 E Selecting Display Items Select the items to be displayed on the viewfinder screen. 2 3 4 Display Mode and Setting Change Message Page Setting the Camera ID 2 3 4 CH1 CH2 E TAPE F E BATT F Displays Remaining Battery Level and Audio Level Displays VTR Section Operation/Status-Related Displays WIDE CH1 CH2 Time Code-Related Displays WIDE h min s frm dB HUMID SLACK Adjusting the Time and Date Adjustment and setup using the setting menu 1 2 3 4 Adjustments and Setup During Recording Adjustments and Setup Using the Setting Menu Adjustments and Setup During Recording Setting the Gain Selector Value Setting the gain selector value 2 3 4 2 (This operation can also be performed using the PAGEoUP/DOWN function.) 3 changed. 4 Adjusting the White Balance/Black Balance Adjusting the White Balance 1 2 3 4 5 6 7 Adjusting the White Balance/Black Balance When the White Balance Cannot be Automatically Adjusted Error messages related to white balance adjustment When there is no Time to Adjust the White Balance Page Page Setting the Electronic Shutter Shutter Modes Shutter modes and shutter speeds which can be selected Page Page Setting the Electronic Shutter Changing the Shutter Speed/Mode Selection Range 2 3 4 Page Adjusting the Audio Level 4 -40 -30 -25 -20 -15 -10 -5 0 E 2,5 1 4 Page Page Setting the Time Data External Lock Operation Procedure 1 2 3 4 Setting Time Data Setup Card Handling Page Page Writing set data to cards 1 2 (This operation can also be performed using the PAGEoUP/DOWN function.) 3 sition. Protecting stored data When data is not written Reading out data stored on cards 1 2 3 4 5 6 Page Cassettes Ejecting cassettes Preventing Accidental Erasure Page Page 21-2 1-1,1-2 3 4,5 Page Page PlaybackChecking Recorded Contents Rec Review Color Playback Connection With an External VTR Precautions When Connecting an External VTR Recording Simultaneously with the Internal VTR and an External VTR Connections Checking the Function Settings Starting Recording 1 2 Page Recording With an External VTR Instead of the Internal VTR Using the 26-pin/12-pin Output Adaptor Connections Mounting the 26-pin/12-pin output adaptor 1 2 RET Button Page MARKER Screen VF DISPLAY Screen CAMERA ID Screen SHUTTER SPEED Screen SYNCHRO SCAN Screen ! LED Screen SET UP CARD Screen MAIN FUNCTION Screen E BATT/TAPE ALARM Screen FUNCTION 1/5 Screen FUNCTION 2/5 Screen FUNCTION 3/5 Screen FUNCTION 4/5 Screen FUNCTION 5/5 Screen LOW SETTING Screen MID SETTING Screen HIGH SETTING Screen LEVEL 1/6 Screen LEVEL 2/6 Screen LEVEL 3/6 Screen LEVEL 4/6 Screen LEVEL 5/6 Screen LEVEL 6/6 Screen VF OPERATION Screen MENU SELECT 1/3 Screen TIME DATE Screen MENU SELECT 2/3 Screen MENU SELECT 3/3 Screen AUTO SHADING Screen DATA RESET Screen DIAGNOSTIC Screen Warning System Warning System Error Codes Emergency eject 1 2 3 4 5 Maintenance Condensation Page Page Page Page Specifications General Camera Section Viewfinder Specifications VTR Section VTR Audio System VTR Tape Running System Connectors Input Related Components