Panasonic AJ-PD900W - page 89

–89–

Recording

Basic Procedures

This section describes the basic operating procedures for shooting and recording. When starting

to shoot actual images, inspect the unit beforehand to check that all systems are functioning

normally.

¡See the “Inspections Before Shooting” (page 129) for a description of inspection procedures.

Procedures from power supply preparations to inserting a cassette

1Insert a charged battery pack.

2Set the POWER switch to ON and check that the HUMID display does not appear and that

five or more bars of the remaining battery level display are lighted.

¡If the HUMID display appears, wait until the display goes off.

¡If five or more bars of the remaining battery level display are not lighted, replace the bat-

tery pack with a sufficiently charged battery pack.

3Check that there are no cables, etc. around the cassette holder and top panel and then

press the EJECT button to open the cassette holder.

4Check the following items, and then insert a cassette and close the cassette holder.

¡The cassette is not set to write protect status.

¡There is no slack in the tape.

2

3

1

Contents

Main For your safety CAUTION: WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. Page Contents General and Features Features of the Camera Section Page Page Features Features of the VTR section Page Power Supply Section Accessory Mounting Section Audio Function Section (1) Audio Function Section (2) Audio Function Section (3) Shooting (Recording)/Playback Function Section (1) Shooting (Recording)/Playback Function Section (2) Shooting (Recording)/Playback Function Section (3) Shooting (Recording)/Playback Function Section (4) Page Menu Operation Section Time Code-Related Section (1) Time Code-Related Section (2) Warning/Status Display Section Page Page Page Page Page Page Page Page Page 7 8 9 10 Page Page Detaching the Eyecup 1 2 3 Remounting the eyecup Page Page Page Page Page Page Page Page Page Page Connecting the AQ-EC1 Extension Control Unit (Option) Displaying the Setting Menu Inside the Viewfinder Setting Menu Configuration Changing the setting menu configuration Page Selecting the desired item 1 Changing the settings Changing the ON/OFF selection Returning to the default settings Quitting the menu Page Lamp Displays Inside the Viewfinder Setting the ! Lamp Display 2 3 4 EX S OFF 30-25 14.6V 1 A 0dB F5.6------- 1 2 3 4 5 E Selecting Display Items Select the items to be displayed on the viewfinder screen. 2 3 4 Display Mode and Setting Change Message Page Setting the Camera ID 2 3 4 CH1 CH2 E TAPE F E BATT F Displays Remaining Battery Level and Audio Level Displays VTR Section Operation/Status-Related Displays WIDE CH1 CH2 Time Code-Related Displays WIDE h min s frm dB HUMID SLACK Adjusting the Time and Date Adjustment and setup using the setting menu 1 2 3 4 Adjustments and Setup During Recording Adjustments and Setup Using the Setting Menu Adjustments and Setup During Recording Setting the Gain Selector Value Setting the gain selector value 2 3 4 2 (This operation can also be performed using the PAGEoUP/DOWN function.) 3 changed. 4 Adjusting the White Balance/Black Balance Adjusting the White Balance 1 2 3 4 5 6 7 Adjusting the White Balance/Black Balance When the White Balance Cannot be Automatically Adjusted Error messages related to white balance adjustment When there is no Time to Adjust the White Balance Page Page Setting the Electronic Shutter Shutter Modes Shutter modes and shutter speeds which can be selected Page Page Setting the Electronic Shutter Changing the Shutter Speed/Mode Selection Range 2 3 4 Page Adjusting the Audio Level 4 -40 -30 -25 -20 -15 -10 -5 0 E 2,5 1 4 Page Page Setting the Time Data External Lock Operation Procedure 1 2 3 4 Setting Time Data Setup Card Handling Page Page Writing set data to cards 1 2 (This operation can also be performed using the PAGEoUP/DOWN function.) 3 sition. Protecting stored data When data is not written Reading out data stored on cards 1 2 3 4 5 6 Page Cassettes Ejecting cassettes Preventing Accidental Erasure Page Page 21-2 1-1,1-2 3 4,5 Page Page PlaybackChecking Recorded Contents Rec Review Color Playback Connection With an External VTR Precautions When Connecting an External VTR Recording Simultaneously with the Internal VTR and an External VTR Connections Checking the Function Settings Starting Recording 1 2 Page Recording With an External VTR Instead of the Internal VTR Using the 26-pin/12-pin Output Adaptor Connections Mounting the 26-pin/12-pin output adaptor 1 2 RET Button Page MARKER Screen VF DISPLAY Screen CAMERA ID Screen SHUTTER SPEED Screen SYNCHRO SCAN Screen ! LED Screen SET UP CARD Screen MAIN FUNCTION Screen E BATT/TAPE ALARM Screen FUNCTION 1/5 Screen FUNCTION 2/5 Screen FUNCTION 3/5 Screen FUNCTION 4/5 Screen FUNCTION 5/5 Screen LOW SETTING Screen MID SETTING Screen HIGH SETTING Screen LEVEL 1/6 Screen LEVEL 2/6 Screen LEVEL 3/6 Screen LEVEL 4/6 Screen LEVEL 5/6 Screen LEVEL 6/6 Screen VF OPERATION Screen MENU SELECT 1/3 Screen TIME DATE Screen MENU SELECT 2/3 Screen MENU SELECT 3/3 Screen AUTO SHADING Screen DATA RESET Screen DIAGNOSTIC Screen Warning System Warning System Error Codes Emergency eject 1 2 3 4 5 Maintenance Condensation Page Page Page Page Specifications General Camera Section Viewfinder Specifications VTR Section VTR Audio System VTR Tape Running System Connectors Input Related Components