Parts and Their Functions
@SHUTTER speed selector dial
This switch is used to select the shutter speed. SYNCHRO SCAN, SUPER V or any speed from 1/100 (60) to 1/2000 can be selected.
When the SHUTTER switch ? is OFF, the shutter will not operate even if the SHUTTER SPEED selector switch is turned.
ASETUP switch
This switch is used to perform the camera settings. When it is at the ON position, the menu is displayed at PIX OUT on the base station.
BSETUP dial
This dial is used to set the SETUP menu. After using it to make a selection, press it to enter the selection. When the SETUP switch A has been set to ON, the menu settings can be performed. When it has been set to OFF and SYNCHRO SCAN has been selected, the SYNCHRO SCAN speed can be set.
| DETAIL | GAMMA |
|
| C DETAIL control |
|
|
| This control enables the master detail to | ||
|
|
|
|
| |
C |
|
|
| D | be adjusted. |
|
|
|
| ||
| KNEE POINT | KNEE SLOPE |
| F D GAMMA control | |
|
|
| PAINTING |
| This control enables the camera’s master |
E |
|
| ENABLE |
| gamma to be adjusted. |
|
|
| G | ||
|
| GAIN |
|
| |
|
|
| H E KNEE POINT control | ||
|
|
|
| ||
|
|
|
|
| This control is used to set the manual |
| R | G | B |
| knee point. |
|
|
| |||
|
|
|
|
| F KNEE SLOPE control |
|
|
|
|
| This control is used to set the manual |
|
| BLACK |
|
| knee slope. |
I | CALL | TALLY | IRIS |
|
|
GPAINTING ENABLE button
This button enables the painting (GAIN control H and BLACK control I) operations.
HPAINTING GAIN control
This control is used to adjust the R, G and B gain.
IPAINTING BLACK control
This control is used to adjust the R, G and B pedestal.